XDJ-RX3 |
FAQ
- Q1 I can't scratch.
-
A1
Vinyl mode might be turned off (normal mode).
If you spin the top of the jog wheel when Vinyl mode is off, the playback speed will be affected (Pitch Bend feature). Press the JOG MODE (VINYL) button to switch to Vinyl mode.For details, see [Using the jog wheel] in the Operating Instructions.
You can read the Operating Instructions [here].Net Number : 51 - Q2 When I slide the crossfader, the sound doesn’t change. Even if I slide the crossfader all the way to the left/right, I can hear the sound from the other deck.
-
A2
Crossfader Assign may not be set the way you want the crossfader to work.
Select a setting other than THRU for the CROSSFADER CURVE switch.
For details, see the Operating Instructions > [Audio output] > [Channel section/master section].
You can read the Operating Instructions [here].
Net Number : 52 - Q3 When MASTER TEMPO is turned on, the sound sometimes distorts.
-
A3
When MASTER TEMPO is turned on, the sound quality changes due to the sound processing that keeps the key constant. This change in sound quality is part of the unit's specification.
Net Number : 53 - Q4 When MASTER TEMPO or Key Lock is turned on, the sound sometimes distorts.
-
A4
When MASTER TEMPO or Key Lock is turned on, the sound quality changes due to the sound processing that keeps the key constant. This change in sound quality is part of the unit's specification.
Net Number : 54 - Q5 I don't like the cut of the crossfader. Can I adjust it?
-
A5
Yes.
You can adjust the crossfader curve using the CROSSFADER CURVE switch.For details, see the Operating Instructions > [Audio output] > [Channel section/master section].
You can read the Operating Instructions [here].
Net Number : 55 - Q6 I can't hear the Sampler sound in rekordbox (Performance mode). Why not?
-
A6
The output level of the Sampler sound in rekordbox (Performance mode) might be weak.
Turn on Control mode on the deck.
To turn on Control mode, see [Using DJ software] in the Operating Instructions.You can read the Operating Instructions [here].
Select [OFF] for the AUX (OFF, LINE, PORTABLE) switch, then set the TRIM knob in the AUX section to 12 o'clock to see if you can hear the Sampler sound.
Net Number : 56 - Q7 The track I played isn't saved in the performance history ([HISTORY]).
-
A7
When 60 seconds or more have elapsed after the track was loaded, it's registered in the [HISTORY]. Only tracks analyzed by rekordbox are registered.
In the following cases, tracks can't be registered:・ Insufficient free space on the USB device.
・ The USB device is write-protected.
・ The track is being loaded from [FOLDER].Net Number : 57 - Q8 The XDJ-RX3 doesn't work according to the settings I made in the Utility settings when I use rekordbox (Performance mode).
-
A8
When rekordbox is in Performance mode, rekordbox [Preferences] settings are valid.
When using Export mode, the XDJ-RX3 Utility settings are valid.Net Number : 58 - Q9 Waveforms aren't displayed or Sync/Quantize doesn't work when I play tracks from a connected USB device.
-
A9
Loaded tracks might not be analyzed by rekordbox.
To use enlarged waveforms as well as features such as Sync and Quantize, tracks must be analyzed by rekordbox.Net Number : 59 - Q10 What does it mean when the SYNC button is blinking?
-
A10
When the SYNC button is lit, both the beat position and BPM of the track are synchronized. When the LED is blinking, only BPM is synchronized and the beat position isn't synchronized.
If you use pitch bend on a deck that isn't the MASTER, the button will switch from lit to blinking. To switch back to lit (start syncing beat positions), press the SYNC button twice to turn off and turn on Sync again.
Net Number : 60 - Q11 There's a delay when I use Hot Cues and Reloop.
-
A11
Quantize might be turned on. If so, the cue/reloop starts at the nearest beat position when you press the button. If you want to set the cue/reloop point at the position exactly when you press the button, turn off the Quantize function.
Net Number : 61 - Q12 I can't select a track to play next using Track Search or Auto Play while connected to rekordbox (Export mode).
-
A12
Track Search or Auto Play won't work if you load tracks from rekordbox. Load tracks from the XDJ-RX3 to use these features.
Net Number : 62 - Q13 I can't hear the Sampler sound in Serato DJ Pro.
-
A13
The Sampler audio destination of Serato DJ Pro might not be set correctly.
Make sure that [A] is selected in the [Output] column in the upper right corner of the sampler panel.
For details, see the Serato DJ Pro manual, available from the Serato website [serato.com].Net Number : 74 - Q14 I can't change [MIXER MODE] in the unit's settings when using Serato DJ Pro. Why not?
-
A14
When you're using Serato DJ Pro, [MIXER MODE] is automatically set to [XDJ-RX3] and it's not possible to change it.
Net Number : 80