FAQ
- Q1 How do I set the fader curves?
-
A1
To set the crossfader curve:
1. For a crossfader curve that rises steeply, press the [FX3/CUT3] button while pressing the [SHIFT] button.
2. For the default crossfader curve set in the Utility settings, press the [FX2/CUT2] button while pressing the [SHIFT] button.
To change the settings in the Utility settings, see [CROSSFADER CURVE] in [Settings] and [Utility settings] in the Instruction Manual.To set the channel fader curve:
The channel fader curve is set in the Utility settings.
See [CH FADER CURVE] in [Settings] and [Utility settings] in the Instruction Manual for details.You can read the Instruction Manual [here].
Net Number : 14 - Q2 What's buffer size and how can I adjust it?
-
A2
The buffer size setting is a detailed setting related to audio transmission.
When you hear sound cuts or delays in operation, you can solve the issue by adjusting the buffer size.
The larger the value of the buffer size, the less likely you’ll hear sound cuts etc. The smaller the value is, the less likely you’ll experience delays in operation.As an example, when issues such as sound cuts occur, set the buffer size to a large value such as 20 ms.
Play a track and check it no longer cuts.
Next, change to a low value and use the unit.
Repeat these steps until the sound cuts stop and you can’t feel a delay in operation.You can adjust buffer size in Serato DJ Pro [Setup] > [Audio] > [USB Buffer size].
*The best value to set depends on the system environment.
*You don’t need to adjust buffer size if you’re not experiencing a particular problem.Net Number : 15 - Q3 I want to use the unit with a DJ application other than Serato DJ Pro by assigning MIDI. Where can I find the Midi code sent from the unit when I use each button or knob?
-
A3
See the MIDI message list [here].
Net Number : 16 - Q4 Can I change the functions of buttons and knobs to suit my preference?
-
A4
Yes.
Serato DJ Pro has a Remapping feature. You can use it to change the buttons or knobs that features are assigned to. For details, see the Serato DJ Pro software manual on the Serato website [serato.com].Net Number : 17 - Q5 Can I choose to not output the microphone sound via the BOOTH/MASTER2 terminals?
-
A5
Yes. You can do this by turning off [MIC TO BOOTH] in the [UTILITY] screen. For details, see Instruction Manual > [Settings] > [Utility Settings] > [MIC TO BOOTH].
The Instruction Manual is available [here].
Net Number : 18 - Q6 Is there a way to prevent the PC/Mac error sound from playing?
-
A6
Yes. You can change the PC/Mac sound setting so you won’t hear the error sound.
■ Windows
Open [Control Panel] > [Sound] > [Program Events] and turn off all sound settings.■ Mac
Open [System Preferences] > [Sound] > [Sound Effects] and change the device to something other than the DJM-S5.Net Number : 19 - Q7 When my PC/Mac enters standby mode or sleep mode then returns to normal, is it OK to use the PC/Mac?
-
A7
After your PC/Mac returns from standby or sleep mode, be sure to reconnect the unit and restart your DJ application before using it. We don’t guarantee stable operation when your PC/Mac has recovered from standby or sleep mode.
Net Number : 20 - Q8 When I turn on Scratch Cutter mode, all software effects turn off. Can't I use software effects in Scratch Cutter mode?
-
A8
To use software effects, press the [FX/CUT] button while pressing the [MODE] button in Scratch Cutter mode. To turn them off, press the [FX/CUT] button you selected while pressing the [MODE] button again.
Net Number : 43 - Q9 What will happen if I press the [BEAT◀] or [BEAT▶] button while the unit is in Scratch Cutter mode?
-
A9
The speed of cutting will change. You can set it according to your scratch style. There are 3 setting values. The status of the light on the [FX/CUT] button shows the currently selected value:
Lit = instant cut
Slow blinking = slow cut
Fast blinking = fast cutNet Number : 44