FAQ
- Q1 Can I use the Bluetooth function for DJing too?
-
A1
We do not recommend as it will cause latency.
Please use the supplied coiled cable for Djing.Net Number : 16 - Q2 What are supported codecs for the HDJ-X5BT?
-
A2
The supported codecs for the HDJ-X5BT are SBC, AAC, Qualcomm® aptX™ and Qualcomm® aptX™ Low Latency.
Net Number : 17 - Q3 Can I connect the headphones with two or more Bluetooth devices at the same time?
-
A3
No. Only one Bluetooth device can be connected to the headphones.
Net Number : 18 - Q4 What is the range?
-
A4
The HDJ-X5BT supports Bluetooth Class 2. This means it will work approximately 10 meters (33 feet) depending on the environment.
Net Number : 19 - Q5 Can I connect the headphones to a smart TV with the BT function?
-
A5
Yes. You can connect if it is Bluetooth ver 4.2 or higher, not just smart TV.
Net Number : 20 - Q6 I don't know how to pair (register) the headphones with a Bluetooth device and connect them.
-
A6
[Pairing procedure]
1. With the power turned off, press and hold the multifunction button on the headphones until the
LED blinks.
*When connecting a device for the first time: Approx. 3 seconds
*When it is not the first time: Approx. 5 seconds
2. The headphones begin searching for the Bluetooth device to connect to, and the LED blinks red and white alternately. Turn on the Bluetooth device and select the device name “HDJ-X5BT” from the Bluetooth menu on the Bluetooth device.
When the white LED lights, the pairing is complete.
*For the instructions of the Bluetooth device, please refer to the instruction manual of the device.[Canceling procedure]
Following the instructions of the Bluetooth device, please cancel the registration of the headphones paired with the device at the Bluetooth setting on the device.
*For the instructions of the Bluetooth device, please refer to the instruction manual of the device.Net Number : 21 - Q7 I don't know how to use the headphones.
-
A7
Please refer to the Operation Instructions or Quick Start Guide.
URL⇒"https://www.pioneerdj.com/en-us/support/documents/headphones/hdj-x10/"Net Number : 22 - Q8 How can I force disconnect the Bluetooth device?
-
A8
[Disconnecting procedure]
Press the multifunction button for at least 6 seconds while a Bluetooth device is connected.
Press the button for 3 seconds to turn the power off and disconnect the connection.
Press the power button for another 3 seconds to turn the power back on and start pairing mode.Net Number : 23 - Q9 Can I charge the headphones not using a USB port on a computer? (USB AC adapter, mobile battery, etc.)
-
A9
There is a possibility of using it, however, we cannot guarantee the operation.
Net Number : 24 - Q10 Can I use my USB cable to charge the headphones? (The plug looks the same.)
-
A10
There is a possibility of using it, however, we cannot guarantee the operation.
Please use the supplied micro USB cable for charging.Net Number : 25 - Q11 Does the HDJ-X5BT support quick charge?
-
A11
No.
Net Number : 26 - Q12 How many hours does it take to full charge?
-
A12
It takes approximately 180 minutes (3 hours) to full charge them from empty.
Charging time may vary depending on the conditions of use.Net Number : 27 - Q13 Can I listen to music with my headphones while charging?
-
A13
No.
You can't turn on the power of the headphones while charging.Net Number : 28 - Q14 How do I know when my headphones are fully charged?
-
A14
The red LED lights are turned off when charging is complete.
Net Number : 29