XDJ-RR

Q1 [BEAT EFFECTS] does not work.: A1

-Is the [LEVEL/DEPTH] control set to an appropriate position? Turn the [LEVEL/DEPTH] control clockwise or counterclockwise.
-Set the channel that adds the effects properly by using the effect channel selector switch.

Net Number : 27
Q2 Tempo (BPM) cannot be measured or tempo (BPM) measurements are incongruous.: A2

-For some tracks, it may not be possible to measure the tempo.

Net Number : 28
Q3 The jog dial does not work.: A3

Scratch does not respond if the JOG MODE is set to VINYL OFF. set the JOG MODE to VINYL ON.
the built-in JOG is electromagnetic and therefore it may not responsive to touches with gloves.

Net Number : 39
Q4 The last settings are not kept in the memory.: A4

The last memory of TIME/REMAIN, AUTO CUE, MASTER TEMPO, TEMPO RANGE, QUANTIZE and various UTILITY settings starts 5 seconds after the settings are done. There is no last memory if the device is turned on within 5 seconds after the settings are done.
After changing settings, wait at least 5 seconds before turning the power off.

Net Number : 40
Q5 I have loaded a track that has been analyzed with rekordbox and turned the sync function on, but the sync operation is not performed. The SYNC button's LED is lit.: A5

The sync operation may not be working for one of the reasons below.
-Was the track loaded in the folder browsing mode? The sync operation can only be performed if the track is loaded in the library browsing mode.
-The sync operation is not possible if slave deck's BPM is less than the master deck's BPM, even if the tempo is +16%. In this case, the message "OUT OF RANGE" is displayed on the LCD.

Net Number : 51
Q6 When I synchronize, the tempo slider on the deck that is not the master stops working.: A6

When the sync function is turned on for the deck that is not the master deck, that deck's tempo slider is disabled.

Net Number : 53
Q7 The tempo does not change when I operate the tempo slider on the master deck.: A7

To prevent sudden changes in the tempo, if the tempo (BPM) being played on the master deck does not match the tempo corresponding to the position of the tempo slider, the unit is designed so that the tempo does not change until the tempo slider is set to the position corresponding to the currently playing tempo.

The BPM value corresponding to the tempo slider's position is displayed on the LCD's playing speed display. Operate the tempo slider to match this with the value displayed in the square frame directly below this. After this is done, the tempo slider can once again be operated.

Net Number : 54
Q8 TEMPO does not change even after operating TEMPO SLIDER after setting SYNC to OFF.: A8

To keep the tempo from changing suddenly directly after the sync function is turned off, the unit is designed so that the tempo of audio output does not change when the tempo slider is operated until the tempo at the position of the tempo slider matches the tempo of audio output.

The BPM value corresponding to the tempo slider's position is displayed on the LCD's playing speed display. Operate the tempo slider to match this with the value displayed in the square frame directly below this. After this is done, the tempo slider can once again be operated.

Net Number : 55
Q9 The sound of the microphone is not produced or the volume is low.: A9

Set the [MIC LEVEL] control to the proper position.

Net Number : 58
Q10 When I play the same track on the XDJ-RR and on another CDJ player, the BPM display is different.: A10

The way the BPM is processed differs on the XDJ-RR and other devices, so the BPM may be displayed differently. This is not a malfunction.

Net Number : 63
Q11 The sound seems to be distorted when I change the tempo with the master tempo function on.: A11

When the master tempo function is turned on, key control processing is used to keep the key constant, so the sound changes. This change in sound quality is due to the current system's specifications and is to be expected considering product's performance.

Net Number : 64
Q12 The USB devices (flash memory drives and hard disks) is not recognized.: A12

1. Format the track by using formats supported by the unit (FAT32, FAT, or HFS+).
2. The Mac OS standard format of GUID partition map is not supported.
3. If a USB device is formatted with a Mac Extended format where 'Case Sensitive' is set, the unit may not recognize the device properly.

Net Number : 65
Q13 When playing tracks on a USB hard disk, playback sometimes stops.: A13

When using near speakers that produce high volumes, such as club speakers, reading of data on the USB hard disk may be hampered by the influence of the acoustic pressure traveling through the space or vibrations traveling through the table.
Generally, such measures as moving the set to a place where it is not affected by acoustic pressure or using vibration damping materials are effective. For detailed information on installing in such environments, contact your hard disk manufacturer's support center.

Net Number : 66
Q14 Reloop does not start instantly.: A14

When the quantize function is on, playback starts from the nearest beat position at the time the button is pressed. If you want the operation to be performed the instant the button is pressed, turn the quantize function off.

Net Number : 67
Q15 When XDJ-RR and a computer are connected using a USB cable, a message “Device driver software was not installed successfully” is appeared. What should I do?　: A15

This message appears when the USB connection (LINK Export) driver is not installed on your computer.
Please download the driver from here and install it.

Net Number : 82

FAQ Search