FAQ
- Q1 No sound is output from my speakers. Why not?
-
A1
1. The power may not be turned on properly. If the white LED on the speaker is turned off, check that the main power switch on the back of the unit is turned on.
2.The Auto Standby function may be activated. If no audio signal is input for a certain period of time, the white LED on the unit turns off and the unit enters Standby mode. When an audio signal is input, the white LED lights up and the power is automatically turned on. Check that an audio signal is being input. (The Auto Standby function can't be disabled.)
3. The volume level may be set to minimum. Adjust the volume level to the appropriate level.
Net Number : 7 - Q2 Why is sound from my speakers affected by distortion or clipping?
-
A2
The audio input level may be too high.
Adjust the output level of the connected device or adjust the [LEVEL] knob on the front panel of the speaker so the volume is set to the appropriate level.
Net Number : 8 - Q3 Why is the sound level low when I connect a device to the TRS input terminals?
-
A3
Have you connected a device with unbalanced output? The TRS input terminals only support balanced inputs. Instead, connect a device that supports balanced output.
To connect a device with unbalanced output, use the RCA inputs or the stereo mini-jack input.Net Number : 10