Pioneer DJ Support  
◀ Return

S-DJ08

FAQ

Q1 No sound is produced.
A1

① Is the power on? The POWER LED lights blue when the power is on. If the LED is off, set the main power switch on the main unit's rear panel to "ON", then press the power on/standby button on the controller or the main unit's rear panel.
② Is the input properly set? Press the input selector button to select the number for the input to which sound is being input.
③ Is the mute mode set? The input LED flashes when the mute mode is set. Press the MUTE button on the controller to cancel the mute mode.

Net Number : 3
Q2 Sound is distorted.
A2

This is probably because the audio input level is too high. Either lower the volume of the speakers or lower the volume on the input device (DJ mixer, etc.). If the speaker's clip indicator starts flashing, this indicates that the sound is distorted, so lower the volume.

Net Number : 4

 

-Pioneer and rekordbox are trademarks or registered trademarks of the Pioneer Corporation.

 

▲ PAGETOP

Copyright © 2023 AlphaTheta Corporation. All Rights Reserved.