XDJ-RX3 |
FAQ
- Q1 There are three controls to adjust the volume: TRIM, channel fader, and MASTER LEVEL. What's the difference?
-
A1
■TRIM adjusts the volume of the audio coming into the channel. In general, it’s best to set it at the center (12 o'clock) and adjust it if there’s a difference in the volume of tracks.
■The channel fader adjusts the volume of the audio going out of the channel. Normally, for the channel you’re playing, you’ll set it at the top position. For the channel you’re preparing to play next, you’ll set it at the bottom. When you're mixing two tracks, slide the channel faders up and down.
*When you're using the crossfader to mix, set both channel faders at the top.■MASTER LEVEL controls the final volume level going out of the unit to speakers etc. Once you’ve set it to a level you’re happy with, it’s unlikely you’ll need to change it during your performance.
Net Number : 11 - Q2 Can I play tracks from iTunes or YouTube?
-
A2
Yes.
Set the [MIXER MODE] on the XDJ-RX3 to [XDJ-RX3] in the Utility settings.
Audio comes into channel 1. Turn on Control mode on DECK 1.
To turn on Control mode, see [Using DJ software] in the Operating Instructions.
You can read the Operating Instructions [here].You can adjust the volume with the MASTER LEVEL knob. When listening with headphones, turn on the MASTER CUE, turn the HEADPHONES MIX knob all the way to the right, and adjust the volume level with the HEADPHONES LEVEL knob.
Some files, such as Apple Music tracks, can only be played with certain players so you may not be able to play tracks like these. Depending on the situation, you may have to change the audio setting on your PC/Mac. You can change the setting as follows:
■ Windows
Click the speaker icon in the lower-right corner of the screen, then click [Speaker] to switch to [Line XDJ-RX3].■ Mac
Open [System Preferences] -> [Sound] -> [Output] -> [Sound Output Device] and select [XDJ/-RX3] as the sound device.Net Number : 12 - Q3 Which file formats can I play?
-
A3
The supported formats differ, depending on how you use the XDJ-RX3. Refer to the sources below for details, which might change according to updates.
■ USB device/rekordbox (Export mode)
See [Supported file formats] in [Product overview] in the Operating Instructions.
You can read the Operating Instructions [here].■ rekordbox (Performance mode)
See [Music files that can be loaded and played (file formats)] in the rekordbox Operating Instructions.
You can read the rekordbox Operating Instructions [rekordbox.com].■Serato DJ Pro
For details see the Serato DJ Pro manual, available from the Serato website [serato.com].Net Number : 13 - Q4 Can I record my performances?
-
A4
Yes.
■ MASTER REC on the XDJ-RX3
Record your performance on a USB flash drive or hard disk drive (HDD) connected to the USB 2 port on the XDJ-RX3. Use the MASTER REC (WAKE UP) button to start or stop recording.
See [Recording] in the Operating Instructions.
You can read the Operating Instructions [here].Net Number : 14 - Q5 I'd like to know more about the MASTER REC feature.
-
A5
Using MASTER REC, you can record the audio coming from the MASTER OUT of the XDJ-RX3. Here are some more details:
・ You can record the sound to a USB flash drive or HDD connected to the USB 2 port.
・ You can't record to a mobile device, such as an iPhone or Android device.
・ The recorded sound is saved in the [PIONEER REC] folder as a WAV (44.1 kHz/16 bit) file.
・ You can record approximately 90 minutes of audio for every available GB on a USB device.
・ The recorded file will be split after every three hours of recording.
・ The recorded file name will be “RECxxx.WAV” (xxx is a 3-digit number).
・ The maximum number of recorded files is 999.
・ Adjusting the MASTER LEVEL doesn't affect recording.Note: Because this unit doesn’t have a clock, the recording time and date aren’t registered on the storage device (USB).
Net Number : 15 - Q6 Can I connect CDJ or DJM units to the XDJ-RX3 via PRO DJ LINK?
-
A6
It's not possible to connect CDJ or DJM units to the XDJ-RX3 via PRO DJ LINK.
The XDJ-RX3 only supports USB connections (Link Export).Net Number : 16 - Q7 Can I charge a supply power to a portable hard disk using the XDJ-RX3?
-
A7
The USB A terminal on the XDJ-RX3 can supply 5V/1A power.
*Check the power specifications of the device you want to connect before you use it.Net Number : 17 - Q8 What's the best process for connecting a DJ application?
-
A8
Start/exit the DJ application in the following sequence:
■ Starting the DJ application
1. Connect the XDJ-RX3 to your PC/Mac using the USB cable.
2. Press the SOURCE button, then press the SOFTWARE CONTROL button.
3. Press the LOAD 1 and LOAD 2 buttons.
4. Start the DJ application.■ Exiting the DJ application
1. Quit the DJ application.
2. Turn off the XDJ-RX3 or disconnect the USB cable.*If you disconnect and connect the USB cable while the DJ application is running, a malfunction might occur.
Net Number : 18 - Q9 I can't sync a deck using rekordbox Performance mode with a deck using a USB flash drive.
-
A9
It's not possible to do this on the XDJ-RX3.
Net Number : 19 - Q10 How can I monitor sound before loading a track (Touch Preview)?
-
A10
1. Press the [CUE (LINK)] button.
2. Touch the waveform on the browse screen on the unit.
3. You will hear the sound from the touched point．Net Number : 79