REMIX-STATION 500
|
FAQ
- Q1 I want to control MIDI-supported DJ software. Is it possible?
-
A1
This unit can be used as a MIDI controller by connecting this unit with your computer via USB. The MIDI assignment map of this unit cannot be changed, so make sure the MIDI mapping of your DJ software matches that of this unit.
However, if you are using Windows XP and connect this unit to your computer together with another USB-MIDI device, the unit may not work normally or may not be recognized. Connect only this unit to your computer.
Net Number : 17 - Q2 Do I need dedicated driver software?
-
A2
Yes, you do.
You can obtain the driver software from the Pioneer DJ Support siteNet Number : 18 - Q3 The "Installer is trying to install new software. Type your password to allow this." message appears and I cannot install the driver (in Mac OS).
-
A3
Even if your account type is not [Administrator], you can install the driver if you enter the name and password of the administrator.
Net Number : 19 - Q4 Can the AC power adapter be used in all countries?
-
A4
For translation to the foreign language of each support site:
It can be used with an input voltage of 100 to 240 V, but the supplied AC plug varies depending on the country in which it is sold so use it in the country of purchase.Net Number : 21 - Q5 Is it possible to connect a USB hub?
-
A5
Operation while connected via a USB hub is not guaranteed. Connect this unit and the computer directly using the included USB cable.
Net Number : 22 - Q6 Are balanced terminals available?
-
A6
No.
Net Number : 23 - Q7 What is the Kensington security slot used for?
-
A7
It is a slot used to attach an anti-theft wire lock mainly sold for computers.
Net Number : 24 - Q8 Can this unit be connected directly to an amplifier?
-
A8
By connecting the audio outputs of this unit to the external analog inputs of a general amplifier, mini component system, or powered speakers, sound can be output from the respective speakers.
Net Number : 26 - Q9 Can this unit be connected to a mixer without effect send/return terminals?
-
A9
Yes, it can be connected.
There is the following way of use.
-Mixer's master output -> this unit -> amplifier, etc.Connection example
-Audio output device (CDJ, etc.) -> this unit -> mixer's input
For details, see "Connecting the inputs/outputs" in the operating instructions
Net Number : 31 - Q10 Does this unit operate on USB bus power?
-
A10
USB bus power operation is supported.
Net Number : 32 - Q11 Is a sound card required separately to use this unit when connected to a computer?
-
A11
There is a built-in sound card, so no external sound card is required.
Net Number : 33 - Q12 Can this unit be used as equipment permanently installed in clubs?
-
A12
Yes, it can.
Net Number : 35 - Q13 I would like to use DJ software. Is there a specific order in which I have to connect the USB cable and launch the DJ software? Can either be done first?
-
A13
If this unit is connected after the DJ software is launched, the DJ software may not recognize this unit. First connect this unit and then launch the DJ software.
Net Number : 42 - Q14 What is the computer environment required for installing the RMX-500 Plug-in?
-
A14
Windows and Mac operating systems are supported.
For details, see the software download page on the Pioneer DJ Support siteNet Number : 43 - Q15 I would like to change the BPM with the MIDI timing clock.
-
A15
This unit cannot receive signals from the MIDI timing clock.
Net Number : 47
-The Audio Units logo is a trademark of Apple Inc.
-RTAS is a registered trademark of Avid Technology, Inc. or its subsidiaries in the United States and/or other countries.