DJM-750MK2

Q1 What model in the CDJ series is most recommended for use in combination with this unit?: A1

We recommend the XDJ-1000MK2.

To practise mixing at home and step into the club booth with confidence, the DJM-750MK2 makes the ideal addition to your set-up. It inherits various features and design elements from the club-standard DJM-900NXS2 and partners perfectly with XDJ-1000MK2 multi players to create a professional-style set-up that you can hone your skills on.

Net Number : 3
Q2 Are there terminals supporting balanced type inputs/outputs?: A2

The following terminals support balanced type inputs/outputs:

-MASTER1 output terminals (XLR)
-BOOTH output terminal (TRS)
-MIC input terminal (XLR/TRS)

Net Number : 4
Q3 What are the MIDI connection specifications?: A3

The main specifications for MIDI are as follows.

-MIDI messages linked to this unit’s control and button operations are output from the USB terminal to a computer or mobile device.
-The assignments of MIDI messages output from this unit cannot be changed.
-This unit does not support the input of MIDI messages.
-This unit does not have a MIDI START/STOP function.
-This unit is not equipped with a MIDI DIN terminal.

Net Number : 5
Q4 Can this unit's MASTER1 outputs be connected to an amplifier's RCA inputs using an XLR-RCA converter cable (converter plug)? Also, can this unit's MASTER2 outputs be connected to an amplifier's XLR inputs using an RCA-XLR converter cable (converter plug)?: A4

Performance is not guaranteed via a converter cable (converter plug).
Connect the MASTER1 terminals to an amplifier with XLR inputs,
the BOOTH output terminals to an amplifier with TRS inputs.
the MASTER2 output terminals to an amplifier with RCA inputs.
And Do not connect the terminal that can supply phantom power to the [MASTER1] terminal.

Net Number : 6
Q5 What are the specifications of the SEND/RETURN terminals?: A5

The SEND/RETERN terminal enables audio output from the channel selected by the effect channel switches in the BEAT FX section (1 - 4 channel, MIC, CROSS FADER A/B or MASTER) to an external device.
You can apply Beat FX and external FX at the same time thanks to the independent Send/Return section.
You can change SEND/RETURN effect routing using [SEND/RETURN] switch and [RETURN TYPE] switch.
Selectable effect routings are as follows:

-[SEND/RETURN] switch
You can change terminals for SEND/RETURN.
When you select [1/4" JACK], the audio signals input to/output from the [SEND/RETURN] terminal on the back of the unit, in the same way as the DJM-900NXS2.
When you select [USB], the audio signals input to/output from the USB terminal at the upper right section of the operation panel. This enables digital SEND/RETURN to Inter-App Audio effector applications on an iOS device such as RMX-1000 for iPad without deteriorating sound quality.

-[RETURN TYPE] switch
You can change RETURN effect routing.
When you select [AUX], the sound with the effect returns to a different channel where [RETURN AUX] is selected at each channel input switch (1 - 4).
When you select [INSERT], the sound with the effect returns to the same position selected by the effect channel switch. You can completely switch the original sound to the sound with SEND/RETURN effect.

For details, see "Using the SEND/RETURN function" in the Operating Instructions.

The positions of the selector switch are described as below. For details, see "Block Diagram" in the Operating Instructions.

1 - 4
Pre-faders for the respective channels (A pre-fader effect is applied before it is routed through mixer channel faders)

MIC
Post position after the MIC EQ and MIC volume is applied.

CROSS FADER A/CROSS FADER B
Post-crossfader A or B (post-fader effects allow the effect tail to be heard after the crossfader A or B is closed).

Master audio
Pre position before master volume is applied.

Please note: SEND/RETURN does not work on the following conditions:
-A Cable is not connected to the terminal selected by [SEND/RETURN] switch.

-[RETURN/AUX] is not selected by any channel input switch when [AUX] is selected by the [RETURN TYPE] switch.
-Inappropriate audio signal loop is identified based on the selection of the effect channel switch, input switch of each channel, CROSS FADER ASSIGN switch of each channel when [AUX] is selected at [RETURN TYPE] switch.

Net Number : 7
Q6 What is the setting of the MASTER ATT (-12/-6/0 dB) switch upon factory shipment? In what cases should it be switched?: A6

The factory shipment setting is 0 dB.
Switch this according to the rated input level of the powered amplifier or powered speakers.

Net Number : 8
Q7 Does the microphone (MIC) input terminal support phantom power supplies?: A7

No.

Net Number : 9
Q8 Is the microphone (MIC) input terminal of the balanced or unbalanced type? If it is of the balanced type, what are its polarities?: A8

It is a balanced terminal.
For its polarities as seen from the front of the terminal, see the diagram.

Net Number : 10
Q9 Does the DJM-750MK2 support the FADER START function?: A9

No. The DJM-750MK2 does not support the FADER START function.

Net Number : 11
Q10 Does the BOOTH terminal support 3-pin (TRS) phone cables?: A10

Yes.

Net Number : 12
Q11 The BOOTH terminal is a 3-pin (TRS) phone jack. What are the polarities when using it as a balanced terminal?: A11

TIP = HOT, RING = COLD, SLEEVE = GND

Net Number : 13
Q12 I have no Internet connection. Can I still use this unit?: A12

Yes, you can use all the functions of this unit.

Net Number : 14
Q13 What is the Kensington security slot used for?: A13

This slot is for mounting a theft-prevention wire lock.

Net Number : 15
Q14 Does this unit support rack mounting?: A14

Pioneer DJ does not sell a rack mount kit specifically for this unit (as of Sep.h 2017). If you are considering mounting it on a rack, you should consult a rack building specialist, etc.

Net Number : 16
Q15 I would like to connect DJ software to this unit. Should the USB cable be connected and the DJ software launched in a specific order? Can either be done first?: A15

If this unit is connected after the DJ software is launched, the DJ software may not recognize this unit. Launch the DJ software after connecting.

Net Number : 17

FAQ Search