Pioneer DJ Support  
◀ Return

DDJ-WeGO4

FAQ

Q1 I can’t hear the sampler’s sound from the controller’s headphones output.
A1

Sampler's sound is output only to Master output. If you want to listen to sampler's sound, select the [HEADPHONES SELECT MASTER] button and play the sampler.

Net Number : 51
Q2 djay for iOS cannot be controlled by DDJ-WeGO4.
A2

Please follow the steps below to connect and launch the devices.

1. Connect DDJ-WeGO4 with its power off and iPhone/iPad using a iPhone/iPad connecting cable.
2. Press the [STANDBY/ON] button to turn on the power of this controller.
3. Wait until the startup illumination is finished.
4. Launch djay for iOS.

Note: Please remove a cover or a case from your iPhone/iPad when you connect it to the controller. If you use such a iPhone/iPad case in the above Step 1, the connector of the cable may not be fully inserted into iPhone/iPad, which may cause loose connection.

Net Number : 59
Q3 Noise is heard when iPhone/iPad is connected.
A3

Audio glitches (connection noise) may be heard using with this controller when iPhone/iPad is used for calling and data transmission. When you observed this symptom, please change the location or orientation of iPhone/iPad.
If the problem still continues after taking the above measures, please disable mobile data access of iPhone/iPad and access Wi-Fi instead, or enable the Airplane mode.
If you do not use MIC, please lower the [MIC VOL] knob.

Net Number : 75

 

 

▲ PAGETOP

Copyright © 2023 AlphaTheta Corporation. All Rights Reserved.