FAQ
- Q1 Can I connect the unit using a conversion cable?
-
A1
We don't guarantee that a conversion cable will work properly.
Net Number : 55 - Q2 The fader knobs are too hard to pull off.
-
A2
The unit has P-LOCK Fader Caps which stop the knobs slipping off the channel fader and crossfader knobs.
They may break if you pull them too hard so please be careful.Net Number : 56 - Q3 Is the BOOTH terminal TRS or TS? What are its polarities?
-
A3
TRS.
TIP=HOT, RING=COLD, and SLEEVE=GND.Net Number : 57 - Q4 Which output terminals are balanced?
-
A4
The following output terminals are balanced:
MASTER 1 output terminals (XLR)
BOOTH OUT output terminals (TRS)Net Number : 58 - Q5 Does the microphone (MIC) input terminal support phantom power supply?
-
A5
No. Phantom power supply isn't supported.
Net Number : 59 - Q6 Is the microphone (MIC) input terminal TRS or TS? What are the polarities?
-
A6
The MIC input is TRS (balanced).
See the figure below for the polarities as seen from the front of the terminal.Net Number : 60 - Q7 Can I use a stereo microphone?
-
A7
No. Please use a mono microphone.
Net Number : 61 - Q8 Can I replace the crossfader with one from another brand?
-
A8
We don't offer repairs on crossfaders made by other companies.
If you replace the crossfader with one from another brand, your warranty will become invalid.Net Number : 62