FAQ
- Q1 Is the BOOTH terminal TRS or TS? What are its polarities?
-
A1
TRS.
TIP=HOT, RING=COLD, and SLEEVE=GND.Net Number : 39 - Q2 Can I connect the unit using a conversion cable?
-
A2
We don't guarantee that a conversion cable will work properly.
Net Number : 40 - Q3 The fader knob is too hard to pull off.
-
A3
The unit has P-LOCK Fader Caps which stop the knobs slipping off the channel fader and crossfader knobs.
They may break if you pull them too hard so please be careful.Net Number : 41 - Q4 Which output terminals are balanced?
-
A4
The following output terminals are balanced:
[MASTER OUT 1] terminal (XLR)
[BOOTH OUT] terminal (TRS)Net Number : 42 - Q5 Is the microphone (MIC) input terminal TRS or TS? What are its polarities?
-
A5
TRS.
See the figure below for the polarities as seen from the front of the terminal.Net Number : 43 - Q6 Does the microphone (MIC) input terminal support phantom power supply?
-
A6
No. Phantom power supply isn't supported.
Net Number : 44 - Q7 Can I use a stereo microphone?
-
A7
No. Please use a mono microphone.
Net Number : 45 - Q8 Can I replace the crossfader with one from another brand?
-
A8
We don't offer repairs on crossfaders made by other companies.
If you replace the crossfader with one from another brand, your warranty will become invalid.Net Number : 46