FAQ
- Q1 Sometimes the talk over function gets activated and the master sound gets weaker even when not speaking into the mike.
-
A1
The talk over function may be accidentally activated due to static electricity, etc. When not using it, turn the talk over function off.
Net Number : 32 - Q2 The output sound is distorted.
-
A2
This may be caused by the fact that the input level is too high or that the output level is too high.
Adjust the input trim and output level controls so that “OVER” does not light on the Level Indicator.Net Number : 33 - Q3 I have connected an effector by SEND/RETURN but cannot achieve echo reverbs with the fader.
-
A3
If SEND/RTN on this unit is set to “MASTER”, echoing is possible when the audio level of all channels is lowered.
Net Number : 35 - Q4 No signals are output from the MASTER outputs, or only from one channel.
-
A4
When no effector is connected
When SEND/RTN is set to “ON”, no sound is output. Set SEND/RTN to “OFF”.When an effector is connected
If no sound is output even though SEND/RTN is set to “ON”, adjust the LEVEL of SEND/RTN to an appropriate volume.Net Number : 36