The way the BPM is processed differs on the XDJ-1000 and other devices, so the BPM may be displayed differently. This is not a malfunction.

When the master tempo function is turned on, key control processing is used to keep the key constant, so the sound changes. This change in sound quality is due to the current system's specifications and is to be expected considering product's performance.

On the link mode screen, select "PC Control", then press the rotary selector.

1. There is a possibility that you are using a USB device that consumes high current (such as flash memory or a hard disk) (Warning is displayed on the main unit display if electric current more than the permissible amount flows to the USB device). Use a USB device rated lower than the rating of the unit (5V/1A). Alternatively, use a hard disk to which power can be externally supplied through an AC adapter.
2. The unit does not support this format. Format the USB device using FAT32, FAT, or HFS+.
3. The Mac OS standard format of the GUID partition map is not supported.
4. If a USB device is formatted with the Mac Extended format where Case Sensitivity is set, the unit may not recognize the device properly.
5. Some USB devices are not recognized, but this problem can be resolved by updating the unit.

It could be one of the two cases below. Check the USB devices (flash memory drives and hard disks) .
1. There is not enough free space on the USB devices.
2. The device is write-protected.

Only the tracks analyzed by using rekordbox are registered in HISTORY. If the analyzed tracks are not registered in HISTORY, following 4 cases are possible.

1. Not enough space available on the USB device (such as flash memory or hard disk).
2. The USB device is write-protected.
3. The track was selected for less than 60 seconds. (Once the track is selected for more than 60 seconds, the track is registered in HISTORY. If track is paused for more than 60 seconds, or any action other than playback is performed on track for more than 60 seconds, it is registered in HISTORY.)
4. The track was not registered in HISTORY when the track was loaded from the [Folder] and played.

The XDJ-700 does not support file systems other than FAT32, FAT or HFS+. Use one of these file systems.

The tracks cannot be loaded during playback if the LOAD LOCK setting in UTILITY is ON. Set the track to pause or cue standby and press rotary selector or set the LOAD LOCK setting to OFF.

This is a warning against stopping playback accidentally.
If the USB STOP button is released before playback stops, playback continues.

With LINK connections, if USB devices (flash memory drives and hard disks) are inserted in any of the connected players, the player number cannot be changed. Eject the memory device, then change the number.

When using near speakers that produce high volumes, such as club speakers, reading of data on the USB hard disk may be hampered by the influence of the acoustic pressure traveling through the space or vibrations traveling through the table.
Generally, such measures as moving the set to a place where it is not affected by acoustic pressure or using vibration damping materials are effective. For detailed information on installing in such environments, contact your hard disk manufacturer's support center.

Is the quantize function on?
When the quantize function is on, playback starts from the nearest beat position at the time the button is pressed. If you want the operation to be performed the instant the button is pressed, turn the quantize function off.

Is the track over 15 minutes long?
The scale is not displayed for tracks whose playing time is over 15 minutes.

Check the following items.

1. Check that the player number has been set correctly. For details, see the Operating Instructions.
2. Check that the LAN cable is correctly connected to the LINK terminal.
3. Check that the power of the switching hub is turned on.
4. Disconnect unnecessary devices, if any, from the switching hub.

The behavior differs according to the mobile device's specifications.
When an access point with a strong signal (one that has been connected to in the past, one with open security, etc.) is detected on the list of wireless (Wi-Fi) connections set on the mobile device, the connection switches automatically.

This depends on the mobile device's specifications, but to avoid this operation and prevent the mobile device connection from switching by itself, delete that access point from the list in the wireless (Wi-Fi) settings.

When rekordbox (iOS/Android) is running and the telephone or another application is used in the foreground, rekordbox (iOS/Android) processing continues in the background. However, applications running in the background may be suspended or stopped due to iOS or Android operating system control.
If you have used the telephone or another application, quit it promptly and set rekordbox (iOS/Android) back to the foreground.

First, as a condition to become the sync master, the loaded track must fulfill all of the requirements below.
-It must have been analyzed with rekordbox.(A deck cannot be set as the master for tracks that have not been analyzed.)
-The track must have a BPM of 40 or greater for a tempo of 0.0%.

-The deck on which playback was started first is set as the master.
-When the pause operation is performed on the master deck (by pressing the PLAY button during playback, pressing the CUE button or touching the jog dial), or when a track is loaded, the master deck switches to the currently playing deck. (It does not switch while in the pause mode.)

With a player that is not the master, if the sync mode is turned on, the sound is synchronized with the BPM of the master player, so that player’s tempo slider is disabled.

The TRACK SEARCH buttons cannot be used while using a mobile device (smartphone or tablet). Press the BROWSE or BACK button, then search for tracks from the browse screen.

It may happen that the necessary transfer rate cannot be maintained due to the specifications of the terminal you are using or due to the wireless environment, resulting in the sound stopping. Below are some methods to avoid this.

-Use wired connections to play tracks.
-Reduce the number of players being used simultaneously (to two generally speaking).
- Do not increase the playing tempo. (Generally speaking, use with a tempo range of ±16%.)

It may happen that transfer rate of the terminal you are using is insufficient, resulting in the sound stopping. Below are some methods to avoid this.

1. Reduce the number of players being used simultaneously (to two generally speaking).
2. Do not increase the playing tempo. (Generally speaking, use with a tempo range of ±16%.)

This may be due to one of the following reasons:

1. The Android smartphone you are using does not support the MTP mode. The smartphone must support the MTP mode in order to connect it by USB cable to the XDJ-1000. For information on whether or not your smartphone supports the MTP mode and how to set it, see the operating instructions of the smartphone.
2. Depending on the specifications of the MTP mode of the smartphone you are using, the operation may differ depending on whether or not an SD memory card is inserted. In some cases, it may be possible to connect the smartphone to the XDJ-700 after removing (or inserting) the SD memory card.
3. Depending on the specifications of the MTP mode of the smartphone you are using, there are some terminals on which the “MTP in use” message is displayed continuously in the foreground of the screen of the smartphone while connected by MTP. With such terminals, rekordbox cannot be operated with MTP connections, so such terminals cannot be connected to the XDJ-1000 using a USB cable.
4. Depending on the specifications of the MTP mode of the smartphone you are using, MTP connections may only be usable with applications exclusively for Macintosh or Windows. Such terminals cannot be connected to the XDJ-1000 using a USB cable.

Pay attention to the following when calibrating the touch panel in the graph setting mode.
When calibrating, use a touch pen or other object with a narrow tip to touch the center of the point at which the + marks that are displayed intersect.
The calibration may not be accurate if you use your finger when calibrating.

Calibration adjustment of touch display could be incorrect. Adjust the touch display by using the [TOUCH DISPLAY CALIBRATION] settings in the [UTILITY] screen.

Music data is managed in increments of 1/1000 sec. when VINYL MODE is ON, and 0.5 frame (1/150 sec.) when VINYL MODE is OFF.
The pause position may shift if the track is paused when VINYL MODE is ON and then VINYL MODE is switched to OFF.