CDJ-2000NXS |
FAQ
- Q1 The USB devices (flash memory drives and hard disks) is not recognized.
-
A1
1. You may be using a USB devices (flash memory drives and hard disks) with a large consumption current. (If a current above the allowable level flows in the USB devices, a caution appears on the CDJ-2000nexus's Main unit display.) Use USB devices with a power consumption within the CDJ-2000nexus's rating of 5V/2.1A. Also, use an Hard disks for which power can be supplied externally with and AC adapter, etc.
2. The format is not supported on the CDJ-2000nexus. Format in FAT32, FAT or HFS+.
3. The CDJ-2000nexus does not support the GUID partition map Mac OS standard format.
4. USB devices formatted with "Distinguish between capital/small letters" set for the Mac extension format may not be recognized.Net Number : 8 - Q2 The USB memory device or USB hard disk is recognized on the computer, but not on the CDJ-2000nexus.
-
A2
The CDJ-2000nexus does not support file systems other than FAT32, FAT or HFS+. Use one of these file systems.
Net Number : 9 - Q3 The disc is not ejected when I press the DISC EJECT button.
-
A3
When the EJECT/LOAD LOCK setting in UTILITY is turned on, discs cannot be ejected during playback. Either first set the pause or cue standby mode then press the EJECT button, or turn off the EJECT/LOAD LOCK setting.
Net Number : 11 - Q4 I connected a mobile device to this unit via a wireless LAN access point, but the mobile device switched to a different access point by itself.
-
A4
The behavior differs according to the mobile device's specifications.
When an access point with a strong signal (one that has been connected to in the past, one with open security, etc.) is detected on the list of wireless (Wi-Fi) connections set on the mobile device, the connection switches automatically.This depends on the mobile device's specifications, but to avoid this operation and prevent the mobile device connection from switching by itself, delete that access point from the list in the wireless (Wi-Fi) settings.
Net Number : 27 - Q5 I was holding a DJ performance with rekordbox (iOS/Android) and a CDJ-2000nexus connected, but when I used the phone or another application on the mobile device the performance was interrupted.
-
A5
When rekordbox (iOS/Android) is running and the telephone or another application is used in the foreground, rekordbox (iOS/Android) processing continues in the background. However, applications running in the background may be suspended or stopped due to iOS or Android operating system control.
If you have used the telephone or another application, quit it promptly and set rekordbox (iOS/Android) back to the foreground.Net Number : 28 - Q6 During a DJ performance with rekordbox (iOS/Android) and the CDJ-2000nexus connected, communications were cut off after I left the message dialog of another application displayed.
-
A6
When rekordbox (iOS/Android) is running and the message dialog of another application is displayed in the foreground, rekordbox (iOS/Android) processing continues in the background. However, applications running in the background may be suspended or stopped due to iOS or Android operating system control.
If a message dialog is displayed, close it promptly and set rekordbox (iOS/Android) back to the foreground.Net Number : 29 - Q7 When I synchronize, the tempo slider on the player that is not the master stops working.
-
A7
With a player that is not the master, if the sync mode is turned on, the sound is synchronized with the BPM of the master player, so that player’s tempo slider is disabled.
Net Number : 31 - Q8 The tempo slider stopped working when I turned the sync function off.
-
A8
To keep the tempo from changing suddenly directly after the sync function is turned off, the unit is designed so that the tempo of audio output does not change when the tempo slider is operated until the tempo at the position of the tempo slider matches the tempo of audio output.
The BPM value corresponding to the position of the tempo slider is displayed grayed out on the playing speed display on the LCD. Operate the tempo slider so that this matches the BPM display for the currently playing track. Once this is done, the tempo slider is enabled and the playing speed display returns to normal.Net Number : 32 - Q9 The caching meter does not increase even though I am loading a track from a device connected by wireless LAN.
-
A9
The caching meter only works with MP3 files that are up to about 10 minutes in length. It does not work with longer files.
Net Number : 33 - Q10 The track search buttons do not work when using a mobile device (smartphone or tablet).
-
A10
The TRACK SEARCH buttons cannot be used while using a mobile device (smartphone or tablet). Press the BROWSE or BACK button, then search for tracks from the browse screen.
Net Number : 42 - Q11 When playing tracks with a computer or mobile device (smartphone or tablet) connected by Wi-Fi (wireless), the sound stops or the emergency loop mode is set.
-
A11
It may happen that the necessary transfer rate cannot be maintained due to the specifications of the terminal you are using or due to the wireless environment, resulting in the sound stopping. Below are some methods to avoid this.
- Use wired connections to play tracks.
- Reduce the number of players being used simultaneously (to two generally speaking).
- Do not increase the playing tempo. (Generally speaking, use with a tempo range of ±16%.)
Net Number : 43 - Q12 When playing tracks with USB (wired) connections on an iPhone on which rekordbox (iOS) is installed, the sound stops or the emergency loop mode is set.
-
A12
It may happen that transfer rate of the terminal you are using is insufficient, resulting in the sound stopping. Below are some methods to avoid this.
1. Reduce the number of players being used simultaneously (to two generally speaking).
2. Do not increase the playing tempo. (Generally speaking, use with a tempo range of ±16%.)Net Number : 45 - Q13 When an Android smartphone/tablet and the CDJ-2000nexus are connected by USB cable, the smartphone/tablet is not recognized by the CDJ-2000nexus.
-
A13
This may be due to one of the following reasons:
1. The Android smartphone/tablet you are using does not support the MTP mode. The smartphone/tablet must support the MTP mode in order to connect it by USB cable to the CDJ-2000nexus. For information on whether or not your smartphone/tablet supports the MTP mode and how to set it, see the operating instructions of the smartphone/tablet.
2. Depending on the specifications of the MTP mode of the smartphone/tablet you are using, the operation may differ depending on whether or not an SD memory card is inserted. In some cases, it may be possible to connect the smartphone/tablet to the CDJ-2000nexus after removing (or inserting) the SD memory card.
3. Depending on the specifications of the MTP mode of the smartphone/tablet you are using, there are some terminals on which the “MTP in use” message is displayed continuously in the foreground of the screen of the smartphone/tablet while connected by MTP. With such terminals, rekordbox cannot be operated with MTP connections, so such terminals cannot be connected to the CDJ-2000nexus using a USB cable.
4. Depending on the specifications of the MTP mode of the smartphone/tablet you are using, MTP connections may only be usable with applications exclusively for Macintosh or Windows. Such terminals cannot be connected to the CDJ-2000nexus using a USB cable.Net Number : 46 - Q14 rekordbox (Android) freezes when the Android smartphone/tablet is connected to the CDJ-2000nexus by Wi-Fi (wireless).
-
A14
In some cases this problem can be solved by updating your smartphone/tablet to the latest firmware version.
Net Number : 47
-Windows®, Windows®7, Windows Vista®, Windows®XP, Windows®2000 are registrated trademarks or trademarks of Microsoft Corporation in the United States and /or other countries.
-Android is registered trademarks or trademarks of Google Inc.
-Mac OS is registrated trademark of Apple Inc, in the United States and/or other countries.
-iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries.
-TRAKTOR PRO/PRO2 is a registered trademark of Native Instruments.
-Serato DJ is a registered trademark of Serato Audio Research Ltd., registered in the U.S. and other countries.
-Scratch Live is a registered trademark of Serato Audio Research Ltd., registered in the U.S. and other countries.
-Allied Telesis is a registered trademark of Allied Telesis, Inc.
-D-Link is a registered trademark of D-Link Systems, Inc.
-NETGEAR is a registered trademark of NETGEAR, Inc.
-The names of companies and products mentioned herein are the trademarks of their respective owners.