
MEP-4000 |
FAQ
- Q1 Categories are not displayed.
-
A1
1. Are you playing a music CD? Categories are not displayed for music CDs.
2. Is the library information stored on the USB storage device? Create the library information with rekordbox.Net Number : 22 - Q2 The BPM values on the MEP-4000’s left and right players differ when playing the same track, or the BPM value displayed on a different product differs from the BPM value displayed on the MEP-4000.
-
A2
On the MEP-4000, the BPM detection processing is performed in real time, so a difference of several BPMs may occur.
Also, the way the BPM is processed on the MEP-4000 differs from the way it is processed on other products, so the displayed BPMs may differ. In either case, this is not a problem with the MEP-4000.Net Number : 25 - Q3 The playback start position for some songs does not change when the auto cue level is changed.
-
A3
In songs that start loudly, the detection of sound level may cause a return to the same start position even if the auto cue level is changed. This is also the case when starting a song from the beginning.
Net Number : 26 - Q4 When I change the tempo with the master tempo turned on, the sound seems distorted.
-
A4
When the master tempo is turned on, key control processing is used to keep the key constant. This change in sound quality is natural considering the current system specifications and the product’s capabilities.
Net Number : 27 - Q5 Playback sometimes stops while playing tracks on a USB hard disk.
-
A5
When used in clubs, etc., near high-volume speakers or places subject to vibrations, the influence of the vibrations or acoustic pressure can make it impossible to load the data from USB hard disks.
Generally, measures to reduce vibrations and isolate from sound can help. For instructions on installing hard disks for use in such environments, contact your hard disk manufacturer’s support service.Net Number : 28 - Q6 E8304 or E8305 errors are output preventing MP3 playback.
-
A6
DJS may not support the format of your MP3 files or there may be data problems. See the User's Manual for information on supported formats.
Net Number : 29 - Q7 The REMAIN display does not show a time indication.
-
A7
It often takes time to measure and display the length of songs in VBR files.
Net Number : 30 - Q8 Some time is required to load tracks from a USB memory device or USB hard disk.
-
A8
It takes time when the folder hierarchy is deep or when folders contain many files. It also takes time when there are files other than music files, so it is a good idea to keep non-music files in different folders.
Net Number : 31 - Q9 Cue and loop points of songs cannot be stored on a USB memory device or USB hard disk.
-
A9
There are two reasons why this may not be possible, check your USB memory device or USB hard disk for the following.
1. There is not enough free space left on the USB memory device or USB hard disk.
2. The drive is write protected.Net Number : 32 - Q10 Why is that when a song is paused at its beginning that sound is output when there should be silence?
-
A10
The pause with sound function plays a dozen or so frames before the position at which the track is paused in a loop, so if you pause at the beginning of a track and there is sound directly before the end of the previous track, that sound may be produced.
Net Number : 34 - Q11 I cannot eject a disc by pressing the EJECT button.
-
A11
A disc that is being played cannot be ejected. Press Pause or Cue standby before pressing the EJECT button.
Net Number : 35