Pioneer DJ Support  
◀ Return

XDJ-AERO
XDJ-AERO-W

FAQ

Q1 When I tried to use the USB recording function, "REC ERROR" was displayed.
A1

This is displayed when there has been an error in the writing process, and depends on the USB device's specifications and performance. If the message is displayed repeatedly, we recommend using a different USB device.

Net Number : 114
Q2 "Not Analyzed" is displayed when loading a track.
A2

This indicates that the track has not been analyzed with rekordbox.
Even for tracks that have been analyzed with rekordbox, if they are loaded in the folder browsing mode, they are treated as tracks that have not been analyzed and this message appears.

The sync and quantize functions will not work without rekordbox analysis information, so we recommend analyzing the tracks with rekordbox and loading them in the library browsing mode.

Net Number : 172
Q3 "USB Error, Remove USB" is displayed.
A3

This is displayed if there is an excess current in the USB device.
-Have you connected a USB device with a current consumption of 500 mA (a power consumption of 2.5W) or greater (such as a USB hard disk)? Use a USB device with a current consumption of less than 500 mA (a power consumption of less than 2.5W).
-The USB device may be damaged.

Net Number : 173
Q4 "USB FULL" is displayed.
A4

If the USB device runs out of free space during master recording, this is displayed and master recording stops.

Net Number : 174
Q5 "READ ONLY" is displayed.
A5

This indicates that writing is not possible on the currently connected USB device (that it is for reading only). (USB devices in the HFS+ journaled format or USB devices that are write-protected.) In this case, the behavior is following:
*Writing of HISTORY information as well as the Master Rec and Beat Sync functions do not work.
*Category browsing is no longer possible and only display in the folder browsing mode is possible.

Net Number : 175
Q6 "Change LINK Mode" is displayed.
A6

This message is displayed when you try to connect this unit to an access point that is already being used for the PRO DJ LINK function.
This unit does not support PRO DJ Link, so either disconnect the PRO DJ LINK connection then restart rekordbox, connect to a different access point or switch [UTILITY] -> [WLAN SETTING] -> [MODE] to [ACCESS POINT].

Net Number : 176
Q7 "Connection Lost" is displayed.
A7

The Wi-Fi connection has been interrupted.
There may be a problem with your wireless environment.
-When using this unit in the access point mode, try moving the mobile device closer to this unit.
When using this unit in the WLAN client mode, try moving this unit closer to the wireless LAN router and the wireless LAN router closer to the mobile device.
-If there is another wireless LAN router, a microwave oven, etc., in the room, try moving that device away from this unit and the mobile device.
-Try setting the wireless channel to AUTO.
-When using WAV or AIFF files, try changing to MP3 or AAC files.
-If large amounts of data are being transferred by wireless connection nearby (for example for high picture quality net video playback), try stopping data transfer.

Net Number : 184
Q8 In the PC control mode, when I try to load tracks from a USB device or by Wi-Fi, “LOAD LOCK” is displayed and the tracks cannot be loaded.
A8

When Load Lock is on, tracks cannot be loaded onto the deck in the PC control mode. (Tracks cannot be loaded even if the track on the deck in the PC control mode is paused.)
To load the tracks, set the UTILITY -> LOAD LOCK setting to “OFF”.

Net Number : 187
Q9 After updating the firmware, the “UPDATE” message appears when I turn on the power.
A9

Updating may not have been completed normally.
If the bar graph on the liquid crystal display is advancing, updating is being performed again. Wait as such until updating is completed (and the unit is set to standby).
If the bar graph is not advancing, insert the USB memory device containing the update file into the USB device insertion slot. Updating is performed again, so wait as such until updating is completed (and the unit is set to standby).

Net Number : 191

 

-Pioneer and rekordbox are trademarks or registered trademarks of the Pioneer Corporation.
-iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries.
-Virtual DJ is a registered trademark of Atomix Productions.
-TRAKTOR is a registered trademark of Native Instruments.

 

▲ PAGETOP

Copyright © 2015 Pioneer DJ Corporation. All Rights Reserved.