FAQ
- Q1 No sound is output from my VM series speaker. Why not?
-
A1
1. The power may not be turned on properly. If the white LED on the speaker is turned off, check that the main power switch on the back of the unit is turned on.
2. The Auto Power Off function may be activated. When the Auto Power Off function is turned on, the white LED on the unit turns off. This is because the unit enters Standby mode if no audio signal is input for a certain period of time. When an audio signal is input, the white LED lights up and the power is automatically turned on. Check that an audio signal is input normally.
3. The volume level (VOL) may be set to MIN. Adjust the volume level to the appropriate level.
Net Number : 7 - Q2 Why is sound from my VM series speaker affected by distortion or clipping?
-
A2
The audio input may be too high.
Adjust the output level of the connected device or adjust the [LEVEL] knob on the rear panel of the speaker so the volume is set to the appropriate level.
Net Number : 8