DJM-TOUR1

Q1 What can I do by connecting this unit and a computer by USB?: A1

You can perform DJing using DJ software and create and record tracks. This unit supports two interfaces: the "USB sound card" for the input/output of digital audio signals and a computer, and the "MIDI interface" that can control the operation of buttons and knobs of the unit from the computer.

1. The USB sound card enables input of the (digital) sound from DJ software on the computer to this unit.
2. The USB sound card also enables input of the (digital) sound from this unit to DJ software on the computer.
3. The MIDI interface enables control of DJ software on the computer by sending MIDI signals.

Net Number : 35
Q2 I would like to use my DJ software. Is this possible simply by connecting this unit and the computer with a USB cable?: A2

Settings must be made on this unit and on the computer beforehand.
When using in combination with the sound device of another unit, the preparations in "1" below are not necessary, but in principle we recommend using this unit's built-in sound card.

1. To use the USB sound card function
First, the dedicated driver software must be installed on the computer. For instructions on installing the driver software and details on operations with the USB sound card (audio interface) function, see "Connecting to the control panel" in this unit's operating instructions. For the settings on the DJ software, see your DJ software's operating instructions.
2. Using the USB-MIDI interface function
For details of operations with the MIDI interface function, see "Operating DJ software using the MIDI function" in this unit's operating instructions. For the settings on the DJ software, see your DJ software's operating instructions.

Net Number : 36
Q3 What are the specifications of the USB sound card (audio interface) function?: A3

The standards below are supported.
With any of these standards, the dedicated driver software must be installed using the "Driver Software".

Windows
ASIO: Up to four sets of inputs and five sets of outputs of stereo audio signals with sampling frequencies of 44.1 kHz, 48 kHz or 96 kHz and bit depths of 24 bits can be input/output simultaneously.
Direct Sound: One set of stereo audio signals with sampling frequencies of 44.1 kHz, 48 kHz or 96 kHz and bit depths of 24 bits can be input/output simultaneously. Use USB1/2 as the input.

Mac OS
Core Audio: Up to four sets of inputs and five sets of outputs of stereo audio signals with sampling frequencies of 44.1 kHz, 48 kHz or 96 kHz and bit depths of 24 bits can be input/output simultaneously.

Pioneer DJ provides the latest firmware and driver software on its web support page. Get them from here.

Net Number : 37
Q4 Is operation possible even when the USB sound card built into this unit and the sound card of another device are connected to the same computer?: A4

Normal operation is not guaranteed in this case. We strongly recommend connecting only this unit to the computer's USB port when using this unit.

Net Number : 41
Q5 Can this unit be used for MIDI control of DJ software ?: A5

Yes.
This DJM sends MIDI signals corresponding to each button and knob to control DJ software on a computer connected to a USB port. Check the MIDI message list on the Pioneer DJ support page. For instructions on the settings on the DJ software side, see the Operating Instructions of your DJ software.

(*サポートサイトという表現は今後なくなる予定とCRM飯塚さんに伺いました、詳しくはCRM課のご確認下さい。)

Net Number : 42
Q6 Tell me some DJ software programs that support MIDI control.: A6

MIDI is a universal standard, so there are many DJ software programs that support MIDI control, such as the Native Instruments "TRAKTOR" and "TRAKTOR SCRATCH" series, Atomix "Virtual DJ", etc. For details, contact the DJ software manufacturer.

Net Number : 43
Q7 Can I use rekordbox dj?: A7

Yes.
rekordbox dj supports the USB sound card (audio interface) of this DJM.

When this DJM is connected to CDJ-2000NXS2 through PRO DJ LINK, the HID feature to control rekordbox dj will also be available.

With our DVS Plus Pack for rekordbox dj (available soon), DVS features using control Vinyl and Time control file will be available.

Net Number : 44
Q8 Can tracks managed with iTunes be input to this unit's USB sound card (audio interface)?: A8

Yes.

Windows
Click on the Start menu, select "Run", type "mmsys.cpl" and click "OK". The audio settings window will open.
At the [Playback] tab, select "DJM-TOUR1". Audio signals will be sent to the Channel 1of this DJM. Signals cannot be sent to other channels.
*This cannot be used at the same time with the ASIO driver.

Mac OS
Open [System Preferences] > [Sound] > [Output] and select "DJM-TOUR1" from the list of sound output devices.
Open the Audio MIDI Setup application located in Utilities. Select "DJM-TOUR1". You can change output channel for this DJM by using [Configure Speakers ...] dialog.

Net Number : 46
Q9 I do not want to output the sound of the computer's program events (warning sounds, etc.). Is there a way to prevent this?: A9

Yes, by changing the computer's settings.

Windows
At the control panels' sound settings, turn off all the program event sound settings.

Mac OS X
At the "System Preferences" – "Sound" panel, set the sound effect playing device to something other than DJM-TOUR1.

Net Number : 47

FAQ Search