XDJ-RR

Q1 Can I use a stereo microphone?: A1

Stereo microphones are not supported. Use a monaural microphone.

Net Number : 4
Q2 Can I load music tracks on two decks from a single USB device?: A2

Yes, you can load music tracks on two decks from a single USB device.
Press the media select buttons [USB1] or [USB2] to enable browsing in the USB device, and select rotary selector to load the music tracks.

Net Number : 17
Q3 Is power supply possible from USB terminal even when portable hard disk is connected?: A3

Power supply up to 1 A is possible.

Net Number : 19
Q4 There are three types of volume adjustments, with the TRIM, channel fader and MAIN VOL (MASTER LEVEL) controls. What is the difference between them?: A4

TRIM
This adjusts the audio level input from external devices to the respective decks.

CHANNEL FADER
These adjust the audio level output from the respective decks for mixing.

MAIN VOL
This adjusts the audio level output from this unit to external devices.

Net Number : 23
Q5 For some tracks, playback starts in the same place even when I change the auto cue level.: A5

For tracks that start right off with a high volume, the point at which the set volume is detected may not change even when the auto cue level is changed. In this case, the cue position will be the same.

Net Number : 43
Q6 When I press the USB STOP key while playing a track on a USB memory device, the volume of the sound be played lowers.: A6

This is a warning against stopping playback accidentally.
If the USB STOP key is released before playback stops, playback continues.

Net Number : 44
Q7 What sample rates are supported?: A7

44.1 kHz and 48kHz are supported. (Sample rates of 88.2 kHz and 96 kHz are not supported.)

Net Number : 48
Q8 I don't understand the conditions by which the sync master switches.: A8

To be aMASTER, the loaded track must fulfill the following requirements:
-It must be analyzed in the rekordbox.
-It should be loaded in Library Browse.
　(If the track is loaded in Folder Browse, it does not become the MASTER)
-The track must have a BPM of 40 or more at a TEMPO of 0.0%.

The following are the conditions to auto-switch the MASTER. It operates on the following specifications when the track fulfilling the requirements to be MASTER is on the left and the right DECK:
-The DECK that has started the playback first becomes the MASTER DECK.
-If the MASTER DECK is paused (PLAY and CUE buttons are pressed during the PLAY and JOG is touched) or has a track loaded, MASTER moves to the DECK with PLAY status. (Does not operate when paused.)

Net Number : 50
Q9 What does it mean when the SYNC button is flashing?: A9

SYNC synchronizes the BPM and the beat positions, but when the SYNC button is blinking, only BPM is synchronized.
The SYNC button changes from being illuminated to blinking on the basis of the following conditions:
-When pitch bend is used during PLAY on a DECK that is not a MASTER DECK.

You can end the blinking status by using the following steps:
-Press the SYNC button. (SYNC button turns OFF)

Net Number : 52
Q10 What functions become valid on this unit with the settings prepared in advance with rekordbox?: A10

Beat grid adjustment, Play List, MEMORY CUE, MEMORY CUE comments, and MEMORY HOT CUE are enabled.

Net Number : 61
Q11 What are LINE / PORTABLE / OFF of AUX? How should each of them be used?: A11

When you will not use AUX input, you can prevent noise inflow by setting OFF.
LINE and PORTABLE indicate the audio amplification amount.
When, for example, connecting a CDJ, select LINE.
When, for example, connecting the HP analog output of a portable audio player, select PORTABLE because the output level will be low.

Net Number : 70
Q12 Is there any difference in the audio file formats on rekordbox dj (PERFORMANCE mode) and rekordbox (EXPORT mode) when using XDJ-RR?: A12

Yes.
Supported file formats are as follows:
1. rekordbox dj (PERFORMANCE mode)
High-res audio formats such as FLAC and ALAC are supported, because rekordbox dj supports these file formats.
See here for details.
2. rekordbox (EXPORT mode)
High-res audio formats such as FLAC and ALAC are not supported, because XDJ-RR does not support these file formats.
For details, refer to here.

Net Number : 84

FAQ Search