Stereo microphones are not supported. Use a monaural microphone.

We do not support recording using Record function of any DJ software.

Music files purchased since the iTunes Plus service started can be played on this unit (XDJ-R1).
Music files purchased before the iTunes Plus service started cannot be played for copyright protection reasons.

When the beats of the track have been analyzed on this unit or with rekordbox, the maximum length is 4 beats per sample, and the maximum time is 5 seconds per sample.

Yes.

Yes.
The USB device can be browsed by pressing the "USB" medium select buttons on the respective decks. Use the rotary selector to select the track then press the rotary selector.

The XDJ-R1 is equipped with a hot cue function, so hot loops set with rekordbox can be called out.

English only.

No, it can't.

The Pro DJ Link function is not supported.

Yes. It is possibile.

The sync function cannot be used with sampled sounds.

1 Press the [INFO (UTILITY)] button for at least 1 second.
=> The [UTILITY] screen appears.
2 Use the rotary selector to select "AUTO STANDBY", then press the rotary selector.
=> The auto standby screen appears.
3 Use the rotary selector to select "OFF", then press the rotary selector.
=> The auto standby function is canceled.

TRIM
This adjusts the audio level input from external devices to the respective decks.

These adjust the audio level output from the respective decks for mixing.

MAIN VOL
This adjusts the audio level output from this unit to external devices.

Headroom is the maximum level at which input signals can be handled without distortion, indicating the amount of leeway. Generally it is expressed in decibels (dB). The higher this value, the greater the capacity to handle excessive inputs and the lower the tendency for distortion.

The IP address is set automatically by the DHCP function, so there is no particular need to set it on this unit. The IP address can also be checked and set manually from the [UTILITY] settings screen.

No.
Only disconnection of the link with the currently connected device can be selected from the XDJ-R1.

Samples are designed to be loaded into decks, and multiple internal sound sources cannot be played on a single deck.

Yes.
Select [UTILITY] -> [WLAN SETTING] -> [NETWORK SETTING].
At the STEP 1 screen, press the rotary selector.
At the STEP 2 screen, select the type of security. (There are three types: WEP64, WEP128 and OPEN.)

Library browsing
Number of displayed characters: 63

Folder browsing
Folder and file names: 63 characters

ID3 tags
Titles: 63 characters

SSID
32 characters

The tempo can be changed as follows:

CD-DA : -100% to +100%
Others : -16 to +16%.

44.1 kHz and 48 kHz are supported. (Sample rates of 88.2 kHz and 96 kHz are not supported.)

Wireless LAN related settings can be reset. (UTILITY -> WLAN SETTING -> RESET TO DEFAULT)

First, as a condition to become the sync master, the loaded track must fulfill all of the requirements below.
-It must have been analyzed with rekordbox.
(A deck cannot be set as the master for tracks that have not been analyzed or for samples.)
-The track must have been loaded in the library browsing mode.
(A deck cannot be set as the master if tracks have been loaded in the folder browse mode.)
-The track must have a BPM of 70 or greater for a tempo of 0.0%.

Next, concerning the conditions in which the master switches automatically, when tracks fulfilling the conditions for the deck to become a master are loaded in both decks, the operation is as described below.
-The deck on which playback was started first is set as the master.
-When the pause operation is performed on the master deck (by pressing the PLAY button during playback, pressing the CUE button or touching the jog dial), or when a track is loaded, the master deck switches to the currently playing deck. (It does not switch while in the pause mode.)

The sync function normally synchronizes the BPM and beat position. When the SYNC button is flashing, only the BPM is being synchronized. The button switches from lit to flashing under the conditions described below.
-When the pitch bend operation is performed on the deck that is not the master.
-If BPM of the slave dack is less than the master deck's BPM, even if the tempo is +16%, synchronization is not possible and the "OUT OF RANGE" message appears. If the master deck's tempo is changed after this by moving the tempo slider and set to within the tempo range of the deck that is not the master, the SYNC button flashes.

The flashing can be stopped by following the procedure below.
-Press the SYNC button.
The SYNC button turns off.
-Load a track.
-The deck whose SYNC button is flashing is set as the master deck.

The beat grid adjustment, playlist and hot cue functions.

Basically SACD playback is not supported.
However, the CD layer of hybrid discs can be played.

When transferred to the USB memory device using rekordbox, up to 10,000 files can be used.
When transferred to the USB memory device using Explorer, etc., up to 999 folders with up to 999 files per folder can be used.

Yes.

1 Turn on the CROSS FADER START function.
2 Set cues on this unit.
3 Move the crossfader.
This unit's pause mode is canceled and the track is played instantaneously.
-When the crossfader is set back to its original position,
playback cues back to the set cue point and the pause mode is set (Back Cue).
* Use this with [CROSS F. CURVE] set to something other than [THRU].

The length of the loop can be changed by turning the AUTO BEAT control while pressing the SAMPLER button.
For instructions on setting the sampler, see the operating instructions.

-Storing setting information on hot cues for discs
1 Connect the storage medium (USB device) to this unit.
2 Turn the rotary selector to select [BACK UP], then press the rotary selector.
3 Check that [SAVE] is displayed, then press the rotary selector.

-Calling out setting information on hot cues for discs
1 Connect the storage medium (USB device) on which the hot cues are stored to this unit.
2 Turn the rotary selector to select [BACK UP], then press the rotary selector.
3 Turn the rotary selector to select [LOAD], then press the rotary selector.
4 Press the [CALL] button.
The hot cues set at this unit's [HOT CUE/4-BEAT SAMPLER (A, B, C)] buttons are overwritten with the hot cues stored on the storage medium.
The [HOT CUE/4-BEAT SAMPLER (A, B, C)] buttons at which hot cues are stored light.

Recording is not available using a USB stick, HDD and other devices connected to the USB port of this unit.