FAQ
- Q1 I think that generally speaking the TRIM control should be adjusted watching the channel level indicator for a maximum indication of about 0 dB. Why does the indicator go up to +4 dB? From what dB setting does the output sound begin to distort?
-
A1
Generally 0 dB is the reference value for the mixer, but considering usage in many different environments, this unit's channel level indicator goes up to +4 dB. Furthermore, headroom of +17 dB is provided with internal processing, so the sound is not necessarily distorted even when "OVER" lights. However, this unit is equipped with effects that raise the volume, so we recommend adjusting the TRIM control to a level at which red LED does not light.
Net Number : 17 - Q2 There are three types of volume adjustments, with the [TRIM] control, the channel faders and the [MASTER LEVEL] control. What is the difference between them?
-
A2
[TRIM] control
This adjusts the audio level input to the respective channels.Channel faders
These adjust the audio level output from the respective channels.[MASTER LEVEL] control
This adjusts the audio level output from the [MASTER1] and [MASTER2] terminals.Net Number : 18 - Q3 Does this unit have a fader start function?
-
A3
Yes.
Net Number : 19 - Q4 Can this unit be connected to a PC or Macintosh computer by USB? (Is this unit equipped with a sound card?)
-
A4
No. This unit is not equipped with a USB terminal.
(It is not equipped with a sound card.)Net Number : 20 - Q5 Can MIDI signals be output?
-
A5
No.
Net Number : 21 - Q6 Can effects be applied to the sound input from the MIC/AUX terminals?
-
A6
No. Effects can only be applied to the sound input to channels 1 and 2.
Net Number : 22 - Q7 How does the sound color filter's illumination light?
-
A7
It expresses the changes in the sound produced by the sound filter through colors and by flashing.
-When no filter is applied: The illumination is lit orange.
-When the LPF is applied: The illumination flashes red. The stronger the filter effect, the shorter the flashing cycle.
-When the HPF is applied: The illumination flashes green. The stronger the filter effect, the shorter the flashing cycle.Net Number : 23 - Q8 How can the sound be changed with the sound color filter?
-
A8
Filter effects can be applied to the tracks.
When the knob is turned to the LPF side, the high frequency sound is removed. When it is turned to the HPF side, the low frequency sound is removed.Net Number : 24