DJM-2000

Q1 Tell me about the TRIM adjustment. I assume the adjustment is made looking at the level indicator, but to what position on the scale should I adjust?: A1

Generally, under normal circumstances it should be adjusted so that "0" lights. Also, it should be adjusted so that "14" does not light.

Net Number : 17
Q2 What are the digital input’s specs?: A2

Input format: S/PDIF; Sampling frequency: 28 kHz to 96 kHz; Sampling bit number: 16/20/24 bits.

Net Number : 25
Q3 What can be done by connecting a computer?: A3

With USB connections, you can:
1. Operate applications on the computer (fully assignable USB-MIDI function)
2. Input the sound output from applications on the computer to the DJM-2000 (USB audio interface function)
3. Input the sound output from this mixer to applications on the computer (USB audio interface function)

Net Number : 28
Q4 Sometimes when I touch the liquid crystal display in two spots (two buttons), the touch panel doesn’t respond.: A4

If you touch a point away from the center of the indicator for the button, etc., the unit may judge that you have touched a point between two buttons. Touch the center of the button’s indicator.

Net Number : 55
Q5 What are the specs of the SEND/RETURN terminals?: A5

These are pre-insert type terminals with which the signals are input/output before the channel fader.

Net Number : 57
Q6 Can signals be output simultaneously from the MASTER OUT 1/2, MIDI and BOOTH OUT terminals?: A6

Yes.

Net Number : 61
Q7 Can tracks on players connected to the LINK terminal be monitored over the mixer’s headphones via the LINK terminal?: A7

When using LINK connections, monitoring is possible from the computer application supporting the link monitor function (rekordbox), but the player’s tracks cannot be monitored via the LINK terminal.
To monitor the player’s tracks, use the CUE button of the channel to which the player is connected.

Net Number : 64
Q8 What sort of function is Quantize Effect?: A8

This function uses the beat information analyzed with rekordbox to correct the beat effect parameters.
Even when the effect is applied roughly, it is automatically matched to the analyzed beat position.

Net Number : 83
Q9 How has the reverb function been changed?: A9

On conventional models the feedback value was changed, but with the new reverb function the feedback and delay time are changed simultaneously and a sound with the pitch changed is added to the reverberation. The algorithm is the same as the one used on the DJM-900.

Net Number : 84

FAQ Search

-Pioneer is a registered trademark of the Pioneer Corporation.
-Allied Telesis is a registered trademark of Allied Telesis, Inc.
-D-Link is a registered trademark of D-Link Systems, Inc.
-NETGEAR is a registered trademark of NETGEAR, Inc.
-The names of companies and products mentioned herein are the trademarks of their respective owners.