DDJ-RZ

Q1 I don't want to output the sound of the computer's program events (warning tones, etc.). Is there any method to prevent it?: A1

Change the setting in the computer.

Windows
Using the sound settings in Control Panel, set all sound settings for program events to OFF.

Mac OS X
In the Sound panel of System Preferences, set the sound effect playback device to a device other than DDJ-SZ.

Net Number : 13
Q2 I use the TRAKTOR SCRATCH series. Is it possible to perform scratch play using Control CD or Control VINYL?: A2

It is not possible to perform scratch play using Control CD or Control VINYL with the TRAKTOR SCRATCH series on this unit.

Net Number : 16
Q3 I use the Serato DJ series. Is it possible to perform scratch play using Control CD or Control VINYL?: A3

It is not possible to perform scratch play using Control CD or Control VINYL with the Serato DJ series on this unit.

Net Number : 17
Q4 What is headroom?: A4

Headroom indicates the maximum level and margin for handling input signals without distortion. In general, it is expressed in decibels (dB) and as this value becomes larger, it is stronger against excess input and sound is less likely to be distorted.

Net Number : 35
Q5 Is the unit energized while in standby status or when the POWER button is turned off?: A5

The unit has an auto standby function and while in auto standby status, power supply is not stopped. Also, even when in standby status with the POWER button turned off, power supply is not completely stopped. If this unit is not to be used for a long time, disconnect the power cord of the unit from the outlet.

For details of the auto standby function, see the operating instructions.

Net Number : 36
Q6 How do I cancel the auto standby function?: A6

In [Utility] mode, set the auto standby function to "Disable". For details, check "Changing settings - Disabling the auto standby function" in the operating instructions.

Net Number : 37
Q7 There are three types of volume adjustments: TRIM, channel fader, and MASTER LEVEL. Please explain the differences between them.: A7

TRIM
Adjusts the level of audio signals input in each channel.

Channel fader
Adjusts the level of audio signals output from each channel.

MASTER LEVEL
Adjusts the level of audio signals output from the [MASTER1] terminal and [MASTER2] terminal.

Net Number : 38
Q8 Is it possible to record the sound output by DJ play?: A8

You can record the sound using the recording function of rekordbox.
For details, refer to “Recording” in "rekordbox software manual".
Obtain “rekordbox software manual” from the rekordbox web site.
http://rekordbox.com/

Net Number : 39
Q9 Can I assign DDJ-RZ to my favorite settings?: A9

No. If you use DJ software other than rekordbox with MIDI support, it can be used as a general MIDI controller. For details, see the manual for the application.

Net Number : 60
Q10 How can I adjust the buffer size?: A10

The latency (the time it takes to output the sound after DDJ-RZ is operated) will be shorter by reducing the buffer size. Increase the buffer size if the sound breaks up, however, the latency will be longer. Set the minimum buffer size in which the sound does not break up.

For Windows
Adjust the setting in the [ASIO] tab of the DDJ-RZ settings utility.
If using rekordbox, click [LAUNCH DRIVER PANEL] in USB BUFFERSIZE of [SETUP] > [AUDIO] to start the DDJ-RZ settings utility.

For Mac OX
If using rekordbox, adjust USB BUFFERSIZE of [SETUP] > [AUDIO].

Net Number : 61
Q11 Does the DDJ-RZ support recovery from computer standby or sleep mode?: A11

The DDJ-RZ does not guarantee recovery operation from computer standby or sleep mode.

Net Number : 73
Q12 I want to assign the functions of DJ software other than rekordbox to the DDJ-RZ buttons and controls, so I'd like to know the MIDI signal output from each button and control.: A12

Please refer to the MIDI code table.
A MIDI code table can be obtained from the Pioneer DJ support page.

Net Number : 75
Q13 Is it possible to continue outputting the [NOISE] sound using the DDJ-RZ oscillator function?: A13

The sound continues to come out while the [NOISE] button of the oscillator function is held down.

Net Number : 79
Q14 Is it possible to change the sound source of the oscillator function of DDJ-RZ?: A14

The sound source of DDJ-RZ cannot be changed.
To change the sound source of the oscillator function, change the sound source of rekordbox. For using the sound source of rekordbox, set the SOURCE switch of the oscillator to “USB A” or “USB B”.

Net Number : 81

FAQ Search