DDJ-REV7

Q1 Which file formats can I play?: A1

Serato DJ Pro loads and plays the tracks.
Currently, Serato DJ Pro supports major file formats including MP3, AAC, WAVE, AIFF, and Apple Lossless files. This may change due to software updates.

For details see the Serato DJ software manual, available from the Serato website [serato.com].

Net Number : 12
Q2 Can I record my performances?: A2

Yes, by using the Recording feature in Serato DJ Pro.
Click the [REC] on the top left of the Serato DJ Pro screen. The Recording panel will be displayed in the middle of the screen.
Click the [REC] button in the panel to start/stop recording.
Click the [SAVE] button when the recording stops to save the recorded file.

For details, refer to Serato DJ Pro Manual.
You can read the Serato DJ Pro Manual [serato.com].

Net Number : 13
Q3 Can I play audio from sources such as iTunes or YouTube?: A3

Yes.
You can adjust the volume with the MASTER LEVEL knob.
To hear the sound through your headphones, turn the HEADPHONES MIX knob all the way to the right and adjust the volume with the HEADPHONES LEVEL knob.

The audio comes into the channel 1.
Some files, such as Apple Music tracks, can only be played with certain players. You may not be able to play tracks like these.

Depending on the situation, you may have to change the audio setting on your PC/Mac.
Change the setting as follows:

■Windows
Click the speaker icon at the bottom right of the Windows screen and click [Speakers] to switch to [LINE DDJ-REV7].
When using Windows 8.1 or earlier, Refer to Case 3.1: "Check the default device selected in the [Sound] panel " in the guide [here]
*The guide is for rekordbox users, however you can fix the problem in the same manner.

■Mac
Open [System Preferences] > [Sound] > [Output] > [Sound Output Device] and select 'DDJ-REV7' as the sound device.

Net Number : 14
Q4 Can I use the track data and playlists in my Serato DJ Lite, etc. in Serato DJ Pro?: A4

Yes.
If you have already created a library using Serato's DJ software (*), you can use the previously created library with Serato DJ Pro as it is.
If your Serato DJ Intro has already created a library, you may need to reanalyze your track.
*ITCH, Scratch Live, Serato DJ Intro, Serato DJ, and Serato DJ Lite

Net Number : 15
Q5 There are three controls to adjust the volume: TRIM, channel fader, and MASTER LEVEL. What's the difference?: A5

■ TRIM adjusts the volume of the audio coming into the channel from the deck of the DJ application or another source.
In general, it’s best to set it at the center (12 o'clock) and adjust if there’s a difference in the volume of each track.

■The channel fader adjusts the volume of the audio going out of the channel.
Normally, for the channel you’re playing, you’ll set it at the top position. For the channel you’re preparing to play next, you’ll set it at the bottom. When you're mixing two tracks, slide the channel faders up and down.
*When you're using the crossfader to mix, set both channel faders at the top.

■MASTER LEVEL control adjusts the final volume level going out of the unit to speakers etc.
Once you’ve set it to a level you’re happy with, it’s unlikely you’ll need to change it during your performance.

Net Number : 16
Q6 What are LINE/PORTABLE/OFF of AUX? How should each of them be used?: A6

When you will not use AUX input, you can prevent noise inflow by setting OFF.
LINE/PORTABLE indicate the audio amplification amount.
When, for example, connecting a CDJ, select LINE（0dB GAIN).
When, for example, connecting the HP analog output of a portable audio player, select PORTABLE (+12dB GAIN) because the output level will be low.

Net Number : 52
Q7 Can I change the scratch samples for Instant Scratch?: A7

It's not possible to change the [INSTANT SCRATCH] samples built in the DDJ-REV7.
If you want to instantly use your own scratch samples, use the [SCRATCH BANK] in Serato DJ Pro.
For details, refer to the Instruction Manual > "Scratch Bank mode".
You can read the Instruction Manual [here].

Net Number : 53

FAQ Search