DJM-S3 |
FAQ
- Q1 Can I use a stereo microphone?
-
A1
Stereo microphones are not supported. Use a monaural microphone.
Net Number : 15 - Q2 Is simultaneous XLR and RCA output possible for the MASTER output?
-
A2
Yes, simultaneous output is possible.
Net Number : 16 - Q3 What should the master level indicator be set to in order to output 2V? Also, is [MASTER OUT ATT] related to the master level indicator?
-
A3
When [MASTER OUT ATT] is set to 0 dB, the MASTER1 output (XLR) is 2Vrms when the master level indicator is at +3 dB, and the MASTER2 output (PIN) is 2Vrms when the master level indicator is at about +6 dB (off the scale). The movement of the master level indicator does not change when [MASTER OUT ATT] is turned down.
Net Number : 17 - Q4 How much (dB) do you recommend for channel level indicator for each input? How much (dB) is acceptable for output without distortion? How much (dB) do you recommend for master level indicator?
-
A4
We recommend you to keep the channel level indicator not to exceed 12 dB (to keep the level out of red) to prevent sudden loudness. Please control it with the TRIM knob.
Output will not be distorted with the volume up to 21 dB when [MASTER OUT ATT.] of MASTER OUT is 0 dB.
We recommend you to keep the master level indicator not to exceed 12 dB (to keep the level out of red). Please control it with the MASTER LEVEL knob.
CLIP indicator will quickly blink to indicate internal digital clipping.
Please control at [MASTER OUT ATT.] according to acceptable input level of post-connected device. Set attenuation level of audio output from [MASTER 1] and [MASTER 2] terminals.
Please refer to the the operating instructions for details.Net Number : 18 - Q5 There are three types of volume adjustments, with the TRIM, channel fader and MASTER LEVEL controls. What is the difference between them?
-
A5
TRIM
This adjusts the audio level input from external devices to the respective channels . Depending on theMASTER LEVEL value, sound may be output even if TRIM is turned all the way down.Channel fader
These adjust the audio level output from the respective channels for mixing.MASTER LEVEL
This adjusts the audio level output from this unit to external devices.Net Number : 19 - Q6 Can I record DJ performances?
-
A6
The recording function of the DJ application can be used.
Input this unit's sound output (digital) to the DJ application on the computer. (USB sound card function)
For the settings of the sound output from this unit, see "About the driver software and settings utility software" – "About the setting utility software". For the settings on the DJ application, see your DJ application's operating instructions.Net Number : 20 - Q7 Do you have the list of MIDI message?
-
A7
Yes. You can download it from this page.
Net Number : 52 - Q8 Can I play a MIDI sequencer in sync with this DJM?
-
A8
No.
Net Number : 54