XDJ-RX

Q1 What kind of players can be used in combination with the unit?: A1

Turntable (analog player) that can play analog records, or players that can play music CD (CD-DA), sound sources stored in the USB storage device can be used in combination with the unit. Confirm that either of the players is equipped with RCA output terminal.

Net Number : 2
Q2 Are there terminals supporting balanced type inputs/outputs?: A2

The following terminals support balanced type inputs/outputs:
- MASTER OUT1 output terminals (XLR)
- BOOT OUT output terminals (TRS)

Net Number : 3
Q3 Does the Master1output terminals support 3-pin (TRS) phone cables?: A3

3-pin (TRS) phone cables are not supported

Net Number : 5
Q4 What is the Kensington security slot used for?: A4

This slot is for mounting a theft-prevention wire lock.

Net Number : 6
Q5 Can a USB hub be connected?: A5

UBS hubs are not supported.

Net Number : 8
Q6 Can I connect the BD/DVD/CD-ROM to a USB-A terminal? (Connecting portable player) Or, can I connect the IOS/android terminal to a USB-A terminal?: A6

Connecting portable players is out of the warranty scope.
You can connect the IOS/android terminal to a USB-A terminal.

It is, however, necessary to update the firmware of the XDJ-RX when using rekordbox (Android).
For details, see the link.

Net Number : 19
Q7 What are the required specifications of computers for using rekordbox?: A7

The latest information is provided on the support site below.
https://www.rekordbox.com/en/products/rekordbox/system.php

Net Number : 20
Q8 What are the required specifications of mobile devices for using rekordbox (CPU specifications, OS versions, etc.)?: A8

The latest information is provided on the support site below.
https://www.rekordbox.com/en/products/rekordbox/system.php

Net Number : 21
Q9 What are the specifications of USB device (flash memory or hard disk) that can be connected to the unit (such as maximum size)?: A9

The specifications of the USB devices that can be connected to the unit are as follows:
-Corresponding file systems
FAT16, FAT32
(HFS+ can be played, but the tracks analyzed in rekordbox cannot be used. Features such as retention of MEMORY CUE, retention of WAVE, and USB REC are not available.)
-Space limit of HDD
As per the specifications of the file systems.
-Other
If the device is split into multiple partitions, only the first partition can be used.

Net Number : 22
Q10 Up to how many amperes (A) current can be applied to the USB A terminal?: A10

Maximum electric current of 1.0 A is guaranteed.
The electric current value, however, changes as per the specifications of the mobile device.

Net Number : 23
Q11 Is connection to the Internet possible?: A11

No.

Net Number : 24
Q12 Can I connect the unit with the mobile devices (smart phones, tablets) via wireless LAN?: A12

Separate wireless LAN router is required, as XDJ-RX does not have in-built wireless LAN.

Net Number : 25
Q13 What happens if I try to connect two or more computers or mobile devices through wireless LAN access point?: A13

If two rekordbox are connected to the unit and you try to connect the third one, the third device goes in waiting state and cannot be connected to the unit. The new rekordbox in waiting state can be connected to the unit by disconnecting a rekordbox from the two connected devices.

Net Number : 35
Q14 Can a connection be made with Window/Mac PC's with no LAN terminals and XDJ-RX ?: A14

Connection is possible using a wireless router.

For how to connect, please see the operating instructions.

Net Number : 44
Q15 Can I connect a tablet device to XDJ-RX and use it?: A15

You can play the tracks on a tablet device by connecting the tablet device to the USB-A terminal of the XDJ-RX by using a USB cable, or by connecting the tablet device to the wireless router wired to the LAN terminal of the XDJ-RX.
rekordbox (iOS/Android) must be installed on the tablet device.

It is, however, necessary to update the firmware of the XDJ-RX when using rekordbox (Android).
For details, see the link.

Net Number : 45
Q16 Can I connect the MASTER1 output of the unit to the RCA input of the amplifier by using the XLR-RCA conversion cable (conversion plug)? Or, can I connect MASTER2 output of the unit to the XLR input of the amplifier by using the RCA-XLR conversion cable (conversion plug)?: A16

Performance of the connection via conversion cable cannot be guaranteed.
Connect the MASTER1 output terminal with the amplifier having XLR input. Connect the MASTER2 output terminal with the amplifier having RCA input.
Connect the BOOTH output terminal to the amplifier having TRS input.

Net Number : 46
Q17 Does the microphone (MIC) input terminal support phantom power supplies?: A17

No.

Net Number : 47
Q18 Does the BOOTH terminal support 3-pin (TRS) phone cables?: A18

Yes.
Stereo and monaural phone cables can be connected.

Net Number : 48
Q19 The BOOTH terminal is a 3-pin (TRS) phone jack. What are the polarities when using it as a balanced terminal?: A19

TIP = HOT, RING = COLD, SLEEVE = GND

Net Number : 49
Q20 I do not want to output the sound of the computer's program events (warning sounds, etc.). Is there a way to prevent this?: A20

Yes, by changing the computer's settings.

Windows
At the control panels' sound settings, turn off all the program event sound settings.

Mac OS X
At the "System Preferences" – "Sound" panel, set the sound effect playing device to something other than PIONEER XDJ-RX.

Net Number : 54

FAQ Search