FAQ
- Q1 Can I use an XLR cable to connect the RB-DMX1 with lighting fixtures?
-
A1
Please use 120-ohm impedance 3-pin XLR cables supporting DMX signals. Audio XLR cables cannot be used because of the difference of impedance.
Net Number : 7 - Q2 Do I need to purchase rekordbox?
-
A2
You can download rekordbox for free.
To use Lighting mode, please activate rekordbox dj. The rekordbox dj license key card is included in the box of RB-DMX1 so there is no need to buy it additionally.Net Number : 13 - Q3 Does the exclusive driver software need to be installed?
-
A3
There is no need to install the driver software as the standard driver software included in OS is used.
Net Number : 14 - Q4 Is an internet connection required?
-
A4
An internet connection is necessary to download rekordbox dj and upgrade to the latest version.
Net Number : 16 - Q5 Is there anything I need to use this unit in addition to lighting fixtures?
-
A5
In addition to lighting fixtures, you need the followings.
1. Computer where rekordbox dj is installed (activated)
2. DMX cables according to the number of the lighting fixtures
3. 120-ohm terminatorNet Number : 18 - Q6 Can I increase the number of lighting fixtures by using two units of the RB-DMX1?
-
A6
No. The DMX channel number is up to 1 universe (512 channels) for this unit with rekordbox Lighting mode and cannot exceed the limit.
Net Number : 19 - Q7 Should I connect a USB cable to DJ equipment (controller, etc.) and launch rekordbox dj in a specific order? Which should I do first?
-
A7
We recommend launching rekordbox dj after connecting all the devices with USB cables.
Net Number : 20 - Q8 I would like to prepare the same configuration as the lighting package of rekordbox original lighting scene. Are there any devices whose operation has been tested?
-
A8
No. We can't guarantee the operation of lighting fixtures and other devices not manufactured by Pioneer DJ.
Net Number : 23 - Q9 Can I connect the unit to a PC/Mac that only has a USB Type-C port?
-
A9
If you're using a PC/Mac that only has a USB Type-C port, you'll need a USB Type-C (plug) to USB Type-A (socket) conversion cable (sold separately).
When using one of these cables, be sure it's a product recommended by the manufacturer of your PC/Mac.Net Number : 25 - Q10 Can I connect the unit to a PC/Mac via a USB hub?
-
A10
You should connect the unit directly to a USB port on the PC/Mac.
Connecting via a USB hub may cause unwanted noise or malfunction.
If you have to use a USB hub due to a limited number of USB ports on your PC/Mac, be sure to use a product recommended by the manufacturer of your PC/Mac.Net Number : 26