DJM-850-K
|
FAQ
- Q1 What sort of amplifier should I connect to produce sound?
-
A1
This unit is equipped with two sets of MASTER outputs (audio outputs).
The sound can be output to speakers via an external amplifier by connecting these audio outputs to the external inputs of a regular amplifier, mini-component or powered speakers. Connect this unit's MASTER1 output terminals to the amplifier's XLR inputs, the MASTER2 output terminals to the amplifier's RCA inputs.Net Number : 4 - Q2 What model in the CDJ series is recommended for use in combination with this unit?
-
A2
We recommend using this unit in combination with a CDJ-850-K or CDJ-850-S, models which offer high operability thanks to large jog dials and can also be used to control DJ software. This enables DJ performances using file music.
Net Number : 5 - Q3 What are the conditions for players that can be used in combination with this unit?
-
A3
They must be turntables that can play analog records (analog players) or CDJ players that can play music CDs (CD-DA). In both cases, check that they are equipped with audio output terminals.
Net Number : 6 - Q4 Are there terminals supporting balanced type inputs/outputs?
-
A4
The following terminals support balanced type inputs/outputs:
-MASTER1 output terminals (XLR)
-BOOTH output terminal (TRS)
-MIC1 input terminal (XLR/TRS)Net Number : 7 - Q5 What are the MIDI connection specifications?
-
A5
-When controls and buttons on this unit are operated, the corresponding MIDI signals are output to the computer via the USB cable. (See the operating instructions for details.)
-Signal assignments cannot be changed on this unit.
-this unit does not support MIDI.Net Number : 8 - Q6 Can this unit's MASTER1 outputs be connected to an amplifier's RCA inputs using an XLR-RCA converter cable (converter plug)? Also, can this unit's MASTER2 outputs be connected to an amplifier's XLR inputs using an RCA-XLR converter cable (converter plug)?
-
A6
Performance is not guaranteed via a converter cable (converter plug).
Connect the MASTER1 and BOOTH output terminals to an amplifier with XLR inputs, the MASTER2 output terminals to an amplifier with RCA inputs.Net Number : 9 - Q7 I know about connections with the SEND/RETURN terminals when using with the EFX-1000, what can I do by connecting this unit's MIDI OUT terminals with the MIDI IN terminals on the EFX-1000?
-
A7
This unit can convert the tempo information (BPM) into MIDI timing clocks and send this to the EFX-1000. Also, the EFX-1000 is equipped with a mode for applying effects in sync with the MIDI timing clocks input from external devices. By using these functions together, effects applied with the EFX-1000 can be operated with the tempo displayed on this unit's BPM counter.
Net Number : 10 - Q8 What are the specifications of the SEND/RETURN terminals?
-
A8
The audio for the position selected with the effect channel selector switch in the BEAT EFFECT section (pre-channel fader audio, microphone audio, post-crossfader A or B audio, or master audio) is output to the external device through the SEND terminal. After this, the sound processed on the external device returns to the selected position through the RETURN terminal. The meanings of the selector switch positions are described below. For details, see "Block Diagram" in the operating instructions.
1-4
Pre-faders for the respective channels (stage before channel faders)MIC
Stage after MIC EQ and MIC volumeCF.A/CF.B
Post-crossfader A or B (stage after crossfader A or B)Master audio
Stage before master volumeNet Number : 11 - Q9 Does the microphone (MIC) input terminal support phantom power supplies?
-
A9
No.
Net Number : 12 - Q10 Is the microphone (MIC) input terminal of the balanced or unbalanced type? If it is of the balanced type, what are its polarities?
-
A10
It is a balanced terminal.
For its polarities as seen from the front of the terminal, see the diagram.
Net Number : 13 - Q11 Is the sound output from the REC OUT terminals the same as the sound output from the MASTER outputs?
-
A11
The sound is the same, but it is not affected by the master volume setting.
Net Number : 14 - Q12 I would like to use this unit's fader start function. What CDJ/DVJ can I use in combination with this unit?
-
A12
The fader start function can be used when this unit is used combined with a Pioneer CDJ or DVJ equipped with a CONTROL terminal (such as the CDJ-850).
Net Number : 15 - Q13 Can the digital sound of a DVD player be input?
-
A13
This unit is not equipped with digital input terminals, so the digital sound cannot be input.
Net Number : 16 - Q14 Does the BOOTH terminal support 3-pin (TRS) phone cables?
-
A14
Yes.
Stereo and monaural phone cables can be connected.Net Number : 17 - Q15 The BOOTH terminal is a 3-pin (TRS) phone jack. What are the polarities when using it as a balanced terminal?
-
A15
TIP = HOT, RING = COLD, SLEEVE = GND
Net Number : 18 - Q16 Which effecter is recommended, the EFX-500 or the EFX-1000?
-
A16
Either EFX can be connected, but the EFX-1000 offers higher sound quality and more functions. This unit does not support EFX LINK, so connect it to the EFX-1000 using a cord with a phone plug (ø6.3 mm).
Net Number : 19 - Q17 What is the Kensington security slot used for?
-
A17
This slot is for mounting a theft-prevention wire lock.
Net Number : 20 - Q18 Does this unit support rack mounting?
-
A18
Pioneer does not sell a rack mount kit specifically for this unit (as of March 2012). If you are considering mounting it on a rack, you should consult a rack building specialist, etc.
Net Number : 21 - Q19 I would like to connect DJ software to this unit. Should the USB cable be connected and the DJ software launched in a specific order? Can either be done first?
-
A19
If this unit is connected after the DJ software is launched, the DJ software may not recognize this unit. Launch the DJ software after connecting.
Net Number : 22
-TRAKTOR is a registered trademark of Native Instruments.
-TRAKTOR and TRAKTOR SCRATCH are trademarks of Native Instruments Corporation.