DDJ-RZ

Q1 Are there terminals that support the balanced type?: A1

The following terminals support the balanced type.

-MASTER OUT 1 terminals (XLR)
-BOOTH OUT terminals (TRS)
-MIC1 jack (XLR/TRS）
-MIC2 jack(TRS)

Net Number : 3
Q2 Is an Internet environment (connection) required?: A2

Yes. You will need to connect to the Internet to download the rekordbox software and any updates. You will also need to have the computer that has rekordbox installed connected to the Internet in order to activate rekordbox dj,

Net Number : 6
Q3 What do I need other than DDJ-RZ to hold DJ performances?: A3

You will need to prepare a computer for installing rekordbox, as well as powered speakers (or an amplifier and speakers) and headphones for outputting the sound.

Net Number : 7
Q4 Can this unit be used on the computer’s bus power only?: A4

This unit cannot be used on USB bus power. Connect the included AC adapter when using it.

Net Number : 8
Q5 Is a sound card required separately?: A5

A sound card does not need to purchased separately because this unit has a built-in sound card.

Net Number : 9
Q6 Is there a correct order for connecting the USB cable of DDJ-RZ and starting up rekordbox? Can either be done first?: A6

Either can be done first.

Net Number : 12
Q7 What is driver software?: A7

Driver software allows you to connect this unit to a computer.
The driver software can be obtained from the support site of the Pioneer DJ support page.

Net Number : 55
Q8 Is it necessary to install the driver software using Mac OS X?: A8

Yes, the installation is required.
Install the driver software by referring to “Preparing the software” in Operating Instructions.

Net Number : 58
Q9 Can I connect the unit to a PC/Mac that only has a USB Type-C port?: A9

If you're using a PC/Mac that only has a USB Type-C port, you'll need a USB Type-C (plug) to USB Type-A (socket) conversion cable (sold separately).
When using one of these cables, be sure it's a product recommended by the manufacturer of your PC/Mac.

Net Number : 86
Q10 Can I connect the unit to a PC/Mac via a USB hub?: A10

You should connect the unit directly to a USB port on the PC/Mac.
Connecting via a USB hub may cause unwanted noise or malfunction.
If you have to use a USB hub due to a limited number of USB ports on your PC/Mac, be sure to use a product recommended by the manufacturer of your PC/Mac.

Net Number : 87

FAQ Search