DDJ-RB

FAQ

Click here to DDJ-RB tutorial videos.

Q1 Can this unit be used on the computer’s bus power only?: A1

This unit can be used on USB bus power.

Net Number : 2
Q2 Is an Internet environment (connection) required?: A2

Yes. You will need to connect to the Internet to download the rekordbox software and any updates. You will also need to have the computer that has rekordbox installed connected to the Internet in order to activate rekordbox dj,

Net Number : 3
Q3 What do I need other than DDJ-RB to hold DJ performances?: A3

You will need to prepare a computer for installing rekordbox, as well as powered speakers (or an amplifier and speakers) and headphones for outputting the sound.

Net Number : 4
Q4 Is a separate sound card required?: A4

There is an internal sound card, so there is no need to purchase one separately.

Net Number : 6
Q5 Can this unit's MASTER OUT 1 terminals be connected to an amplifier's RCA inputs using an XLR-RCA converter cable (converter plug)? Also, can this unit's MASTER OUT 2 terminals be connected to an amplifier's XLR inputs using an RCA-XLR converter cable (converter plug)?: A5

Performance is not guaranteed via a converter cable (converter plug).
Connect the MASTER OUT 1 terminals and BOOTH OUT terminals to an amplifier with XLR input and the MASTER OUT 2 terminals to an amplifier with RCA input.

Net Number : 24
Q6 Tell me how to install and uninstall the driver software.: A6

Installation
Obtain the latest driver installer from the following site and then install it.
Driver software
Refer to "About the driver software" in the Operating Instructions and then install the driver software.

Uninstallation
-Windows 10/Windows 8.1/Windows 7
　(1) Open [Programs and Features] in the Control Panel.
　(2) Select [DDJ_RB Driver] and click [Uninstall or change].
　(3) Perform the operation following the instructions displayed on the screen.
If you are asked for the administrator’s password or verification, input the password or provide the verification information.

-Mac OS X 10.11/10.10/10.9
(1) Double-click the DDJ-RB_M_X.X.X.dmg file obtained at the time of installation.
If it has been deleted, follow the instructions of the installation procedure again to obtain the file.
(2) Double-click DDJ-RB Uninstaller.
(3) Perform the operation following the instructions displayed on the screen.
If you are asked for the administrator’s password or verification, input the password or provide the verification information.

Net Number : 25
Q7 With Mac OS X, does the driver software need to be installed?: A7

Yes, it does. Refer to "Connections" in the operating instructions and then install the driver software.

Net Number : 26
Q8 What is the Kensington security slot used for?: A8

The slot is used to attach an anti-theft wire lock that is sold mainly for computers.

Net Number : 27
Q9 What type of amplifier should be connected to produce sound?: A9

This unit has one set of analog master output (audio output) terminals.
By connecting this audio output to the external input of a general amplifier, mini component system, or powered speakers, sound can be output to speakers through an external amplifier. Connect the [MASTER] output terminals of this unit to a device with RCA input.

Net Number : 28
Q10 Are there terminals that support the balanced type?: A10

There is not terminals that support the balanced type.

Net Number : 29
Q11 Which type is the microphone (MIC) jack, balanced or unbalanced? If it is the balanced type, what are its polarities?: A11

It is a TS (unbalanced) terminal.

Net Number : 30
Q12 Does the microphone (MIC) jack support phantom power supplies?: A12

No, it does not.

Net Number : 31
Q13 Can I use a stereo microphone?: A13

Stereo microphones are not supported. Use a monaural microphone.

Net Number : 32

FAQ Search